The driver of technological pumps is a very important and necessary profession. All features of this work will be discussed in this article.

Who is a process pump operator?

The specialist, which will be discussed in this article, is engaged in the maintenance of special equipment for pipelines. It does not matter what it may be or vaporous, intended for liquid substances or for gaseous ones. In order for certain substances to circulate, it is necessary to maintain, repair and constantly check the existing equipment. This is exactly what the representative of the profession in question does.

And what can be said about the demand for the profession? Since most enterprises in the CIS countries operate using internal communications operating under a certain pressure, the work of a process pump driver will remain in demand and necessary in the labor market for a long time to come.

About professional responsibilities

The engineer of process pumps, like any other employee, has many duties, tasks and functions.

Here are the most basic of those that can be called:

• Timely repair of elements elimination of problems and malfunctions.
• Ensuring optimal transport of substances through the pipeline.
• Inspection and repair of pump units.
• Work with pumping units - their adjustment.
• Training liquid fuel to transportation.
• Work with liquid substances - their discharge and pumping.
• Work with reports.
• Carrying out technical inspection according to the plan.
• Adjustment of pressure in pipelines.

It has, of course, a process pump driver and many other functions. But it depends on the level of the specialist.

Required education for work

A representative of the profession in question, of course, could not work without proper education. Almost anyone today can enter a college or technical school with a degree in process pumps and compressors. And what knowledge and skills are needed to work in the specialty in question? Here are just a few things an employee should be aware of:

• The principle of operation and the device of automation.
• Design features of compressor equipment.
• Equipment setup.
• Actions in case of accidents.
• Start of pipeline transportation.
• Shutoff valve design.
• Pressure regulation.
• Protective units - their device.
• The use of control devices, the basics of their operation.

The above are just a few of the points that will need to be learned during the training. It is also worth noting that in a college or technical school you will have to master the following subjects:

• Materials Science;
• drawing;
• electrical engineering;
• technical mechanics;
• basics of transportation of substances and some others.

Thus, it will not be possible to just take a job in the specialty "technological pump operator". Education is a necessary and essential part of the profession.

On the demand for the profession

Young people who have graduated educational institution in the required specialty, they are unlikely to be able to get into a difficult situation with finding a job.

The profession "technological pump operator" is in high demand today. Those who wish to work in the specialty under consideration will easily find the optimal one. After all, almost any enterprise that has and operates pipelines needs competent, educated specialists.

It is worth noting that the profession in question is not suitable for everyone. In the workplace, it is unlikely that physically weak people will feel comfortable and confident, weak people. After all, the work in question is truly masculine, to some extent difficult and difficult. But it is offset by excellent career opportunities and a good

About the second category according to the job description

Workers of the second category are, as a rule, beginners who are just beginning to master all the subtleties of the profession. What are the responsibilities of these professionals?

A worker of the second category is obliged to serve as well as installations that pump or prepare oil. Preparation of technological piping schemes, elimination of product leakage (under the guidance of a worker with a higher category) - all this is also within the competence of the worker. It is necessary, among other things, to constantly monitor the operation of pumps, cooling systems, lubrication, ventilation, etc. Control over the serviceability of various valves, measuring instruments, pipelines also falls on a second-class specialist.

Some other features worth mentioning are:

• taking specific samples;
• check valves, as well as their closing and opening;
• wiping, starting and stopping pumping units;
• change of pads.

Naturally, far from all the functions of the working second category were named above. After all, duties and their number depend on the enterprise in which professional activities are carried out.

About the third category according to the job description

A worker with the third category is obliged to carry out constant checks of pumping stations, to service them (we are talking about stations that pump and prepare oil products with a capacity of 500 cubic meters / h).

This also includes the inspection and repair of electric motors (from 500 kW), as well as the maintenance of technological pumping units (no more than 1000 cubic meters / h).

However, this is not all duties. The instruction of the driver of technological pumps prescribes the following functions for a specialist of the third category:

• Monitoring the load of electric motors, pressure in pipes and pumps, lubrication systems, ventilation and cooling systems, etc. All observations are carried out using instrumentation.
• Working with electric motors: starting and stopping them.
• Checking the correct amount of lubricant in certain devices.
• Checking the mode of operation of equipment.

About the fourth category according to the job description

What functions does the job description assign to a representative of the fourth category? What are the duties of a process pump operator here?

The shift accepted by the worker with the fourth category looks something like this: the specialist keeps all the necessary entries in the journal. Next, the following areas are cared for:

drives of contactors of alkylation units;

• pumping stations (from 500 to 1 thousand cubic meters per hour);
• pumping technological installations (capacity - from 1 thousand to 3 thousand cubic meters / h);
• areas with pumping motors (power from 500 to 3 thousand kW).

In addition, the specialist is obliged to monitor the necessary pressure on the pumping discharges. Control over (under the guidance of a worker with a higher rank) is also the responsibility of a specialist with a fourth rank.

Depending on the place where the specialist works, the functions may vary slightly.

About the fifth category according to the job description

The driver of technological pumps of the fifth category is obliged to perform the following functions:

Among other things, a worker with the fifth category is obliged to comply with labor safety rules, competently organize the workplace, provide first aid, etc.

About the sixth category according to the job description

What is a worker with the sixth category obliged to do? What are its functions?

Can be distinguished following points with which the specialist in question is dealing:

• Starting and stopping existing equipment pumping station; check the operation of this station.
• Detection and elimination of various problems in the operation of technical pumping stations.
• Repair and inspection of pumping stations (capacity from 3 thousand cubic meters per hour).

It is also worth adding that a specialist with the sixth category already has the right (or rather the duty) to supervise workers with lower qualifications. There are many tasks here: this is work control, the process of teaching workers certain skills, etc. Again, the number of duties will depend only on production.

About the seventh category according to the job description

A worker with the seventh category is endowed with the following functions and responsibilities:

• adjustment and check of the modes of pumping stations;
• selection of necessary modes at pumping stations;
• maintenance of various pump pipelines, units, electric motors;
• work on the management of pumping stations that pump and prepare oil products (with a capacity of 3,500 cubic meters per hour);
• carrying out various operations to detect and eliminate malfunctions in the operation of pumping units.

In addition to all of the above, the seventh grade process pump operator is required to work with documentation. Making plans for testing, checking and repairing pumping equipment is also the responsibility of the employee. Plans are also being drawn up for the development of operations to improve service, to increase the operation of various instruments. Also, a specialist with the seventh category is obliged to supervise workers with lower qualifications. Everything here will directly depend on the enterprise: the competence of an employee with the highest rank will be only those functions that the authorities will endow.

Pros and cons of the profession

As in any other profession, there are enough advantages and disadvantages in the work of the specialist in question.

What are the advantages of the profession of a process pump operator?

• The salary. Of course, the level of income will depend on the available category. The higher the qualification, the higher the salary. However, it is worth considering that the specialist referred to in this article, even if he has the second category, receives very good money.
• Opportunity for rapid career growth. As already mentioned, there are as many as seven categories in the profession. With proper effort, you can easily improve your skills.

But the profession in question also has disadvantages. Among them are:

• Problems with employment. Workplace may not be available immediately. This is what you should pay attention to before entering the specialty "technological pump operator". Vacancies, unfortunately, are far from everywhere.
• High responsibility. Workers have a lot of functions and responsibilities. Almost every process pump operator will agree with this. However, training in a profession will help you fully get used to it and get everything necessary knowledge and skills.

VKh-T-2 - instructions for servicing pumping stations of water blocks S-6, S-7, S-8, S-7/2, S-8/2. 3.21. VKh-T-3 - instructions for servicing pumping stations S-5, S-7, S-7 / 2, S-23, S-55, S-58. 3.22. VKh-IOT-5 - instructions for labor protection during the operation of high-voltage electric motors of the water supply workshop. 3.23. VKh-PB-1 - instruction on measures fire safety in the waterworks. 3.24. Instructions on the interaction of personnel of the water department with PCh-17, PCh-20 during fires. 3.25. VKh-T-16 - operating instructions for the ventilation systems of the water supply workshop. 3.26. VKh-T-20 - instructions for chlorination of industrial circulating water in the water supply workshop. 3.27. VKh-T-31 - instructions for the conservation of technological equipment of the water supply workshop. 3.28. Instructions for organizing safe traffic Vehicle and pedestrians on the territory of MNP enterprises and organizations. 3.29.

Job description of the driver of pumping units of the 5th category

ON-LINE APPLICATION Agreed ApprovedChairman of the trade union committee Head of the organization General requirements safety. Work as a water supply engineer is allowed for workers aged at least 18 who have passed a medical examination, training and safety briefing. Before being appointed to independent work, the engineer must complete training and pass a knowledge test in the commission on electrical safety rules electrical safety groups. The water supply engineer is allowed to independent work by order of the enterprise. Periodic knowledge testing of the water supply engineer takes place in the commission of the enterprise once every 12 months. The water supply engineer is responsible for; supplying the enterprise with water;

Pumping unit operator: requirements etc

Instrumentation and A, rules for starting and stopping pumping units, methods for troubleshooting equipment and eliminating accidents; 5.6. comply with the established regimen technological process according to the technological instruction; 5.7. to train the newly hired machinists assigned to him in the process of work in safe techniques and labor methods; 5.8. monitor the wearing by subordinate drivers of the issued overalls and special footwear, the use of the required protective equipment by them; 5.9. not allow unauthorized persons into the pump room; 5.10. comply with the requirements of instructions and rules on labor protection, fire and gas safety, industrial sanitation at workplaces and when performing one-time work; 5.11. at least once every three years to attend production and technical courses with the subsequent passing of exams; 5.12.

Error 404 page does not exist

Occupational safety management system. 3.30. Regulations on the procedure for monitoring the work and accounting for failures of instrumentation and automation equipment (KIP and SA). 3.31. Rules for intra-object and access control. 3.32.

Regulations on the procedure for organizing and carrying out work on safe shutdown for a long period and conservation of hazardous industrial facilities. 3.33. Regulations on the system for organizing work on the operation, maintenance and serviceability of the SBS (blocking and alarm systems).
3.34. Rules of the internal labor schedule of employees. 3.35. Instructions on safety measures when working with methanol at enterprises and organizations of MNP.
3.36.

Instructions on technical investigation and accounting of incidents at JSC. 3.37. Accident elimination plan. 3.38. Regulations on the delimitation of functions for metrological support of production between workshops and divisions.

Job description of the driver of pumping units of the 6th category

On the actions of employees in case of detection of a suspicious object or traces of penetration. 3.40. No. 2 - instruction "On the actions of employees in the event of receiving a telephone message containing a threat of a terrorist act in work time". Persons who have reached the age of 18, do not have medical contraindications, have a certificate of education, qualification or special knowledge in this profession, have been instructed, theoretical and practical training, internship and have passed the exam for admission to independent work.

4. RIGHTS The operator of pumping units has the right to: 4.1. stop work in emergency cases, if further continuation of work creates a danger to others or threatens the safety of equipment; 4.2.

Responsibilities of the pumping station operator

The driver's workplace is the entire room in which the equipment and communications necessary to obtain water are located, as well as the adjacent territory, if auxiliary equipment and shut-off and control valves are located on it. Safety requirements in emergency situations 4.1. In the event of a fire in the pump room, take measures to eliminate it. primary means fire extinguishing, call the fire brigade, notify the management. In case of burns, it is necessary to free the affected area from clothing and shoes.
Bandage the burnt surface with a sterile bandage and contact medical institution. Notify the head of the boiler room. In case of severe mechanical injuries, put the victim in a safe place, give him a comfortable and calm position and call an ambulance (notify the head ...

Instructions for the driver of the recycling water pumping station

Faulty equipment caused an accident at a paper mill In the section - News on labor protection On August 1 of this year, a repairman was seriously injured at the Balakhna paper mill of Volga JSC. The incident happened during scheduled repair work press part of papermaking…
Rostekhnadzor inspected enterprises that do not produce marketable petroleum products, but carry out export deliveries nuclear supervision(Rostekhnadzor) informs that as part of the execution of the order of the Deputy Prime Minister Russian Federation Arcadia…

• Must know:

• arrangement and design of equipment for high-power pumping units equipped with engines, pumps and pipe pumps of various systems;
• design and layout of antechambers, wells, pipelines and filters;
• automation and telemechanics of serviced equipment;
• methods for testing serviced equipment;
• a complete electrical circuit of the serviced object (site);
• adjustment and repair of control and measuring devices and automatic control devices;
• rules and regulations of labor protection, safety precautions (when servicing electrical installations in the scope of qualification group V) and fire protection.

Responsibilities of a water pump operator

Library KvantBibliotechka elektrotehnikaZnay and umeyMassovaya radiobiblioteka BOOKS Radio Engineering and Electronics FREE AvtomobilApparatura SVChZapis and playback zvukaLampovaya apparaturaNachinayuschemu radiolyubitelyuOhrana and bezopasnostRadiolokatsiya, navigatsiyaRadiotehnicheskie tehnologiiRadioupravlenie, modelizmRobototehnikaShemotehnikaTeoreticheskaya electronics, radiotehnikaUsiliteliTsifrovaya processing signalovElektronika in bytuElektronika in meditsineElektronika in naukeElektronika musician BOOK REPAIR FREE Repair audiotehnikiRemont household tehnikiRemont videotehnikiRemont lamp TVsRepair of semiconductor TVsRepair of monitorsRepair of office equipmentRepair of radio receiversRepair of telephones and faxesSatellite televisionTheory of televisionTheory of electronics repair

• Monitoring the uninterrupted operation of drive motor pumps, fittings and pipelines of the serviced area, as well as the water pressure in the network.
• Inspection, regulation of particularly complex pumping equipment, water pressure devices, control devices, automation and safety devices.
• Identification and elimination of the most complex defects in pumping units.
• Inspection and load testing of repaired equipment.
• Maintenance of power and lighting installations.
• Replacement of instrumentation.
• Maintenance of electrical equipment with automatic control of the technological process.
• Checking and troubleshooting electrical equipment.
III.

Water pumping unit operator

The driver of pumping units of the 6th category must know: - the device and design of the equipment of high-capacity pumping units equipped with engines, pumps and pipe pumps of various systems; - design and layout of antechambers, wells, pipelines and filters; - automation and telemechanics of serviced equipment; - methods for testing the serviced equipment; - a complete electrical circuit of the serviced object (site); - adjustment and repair of instrumentation and automatic control devices; - rules and norms of labor protection, safety measures (when servicing electrical installations in the scope of qualification group V) and fire protection. 2. Job responsibilities The following job responsibilities are assigned to the driver of pumping units of the 6th category: 2.1.

Large pumping stations, even fully automated, still require participation service personnel. The duties of the pumping unit operator include not so much total control over the process of equipment operation as maintaining it in working order.
What components and assemblies require the closest attention? Which stations are controlled from a centralized control room, and which require the direct participation of a specialist?
In this article, we will give answers to these questions, as well as tell you what the instructions for the pumping unit operator look like.

Supervision of the operation of the pumping station

Any water supply and sewerage facility, which includes and, requires scheduled preventive inspections and repairs. This is the responsibility of the enterprise or individual The one in charge of the object.

• As a responsible person, a pumping unit operator is assigned to the pumping station, whose job description defines the scope of his duties. The actions of the maintenance personnel are aimed, first of all, at ensuring the stable operation of the station, and the mode of operation of its equipment, which allows saving resources.

Here are the specialists who service facilities equipped with stations automatic control operating without an on-duty driver, or centrally controlled from the control room:

• Responsible persons are obliged to make a daily visual inspection of the equipment, noting the readings of the devices in a special log. Although, today there is such automation, which is equipped with recording devices and independently registers the parameters of the equipment.
• As for the scheduled preventive inspection aimed at preventing premature wear of equipment, and as a result, emergency situations, there are certain deadlines.
• They are usually installed by the manufacturer of a particular unit or device. Equipment defects discovered during the inspection must be immediately eliminated, and an appropriate entry made in the log.

The frequency of inspection of operating equipment is as follows:

• Vortex, screw and - 1 time in 3 months
• Compressors - 1 time in 2 months
• Measuring instruments - 1 time per year
• Water meters - 1 time in 2 years
• Shut-off valves - 2 times a year
• Pipelines - 4 times a year

Preventive maintenance is required not only industrial equipment but also household. Therefore, if you have a pump in the well, or a pumping station is installed in the basement of the house, do not force them to work for wear and tear.
Most men can do an inspection and minor repairs with their own hands - there would be an instruction.

Service personnel for pumping stations

More powerful objects than those mentioned in the table, or installations that are not equipped with automation, require the constant presence of a specialist. Moreover, he must undergo appropriate training, and receive a document on the qualifications assigned to him.
Next, we will talk about what it looks like work instruction pumping unit operator, and the video in this article will help us with this.
So:

• In our country, there is a basic document: ETKS (Unified Tariff and Qualification Guide). It lists all existing professions, and qualification requirements to them. ETKS is annually reviewed and updated, and all job descriptions at enterprises are drawn up in accordance with it.

• As for the drivers of pumping units, the ETKS provides for several degrees of their qualification: from the second to the sixth category. The higher the productivity of the pumping station, the higher the category of its maintenance personnel should be.
  In accordance with the category that is assigned to a specialist, he is also paid a salary.
• AT in general terms, the job description for a pumping unit operator looks like this. He must know not only the principles of operation of pumps of various designs, and drives to them, but also communication schemes, permissible loads on them during operation, methods for troubleshooting emerging problems and emergencies.
• The driver must also have some knowledge of physical and chemical properties pumped liquids, know the classification and grades of oils used for equipment. In addition, he must master the basics of electrical engineering, understand how not only pumping, but also electrical equipment functions: motors, compressors, start-up devices, etc.
• Fire protection, safety and labor protection measures are also an integral part of personnel training. Any pump station operator should have this knowledge. As for the characteristics of the work of a person who has one or another category, the alignment is as follows.
• The lowest qualification is for the driver of the 2nd category. It can only work on a plant with a total flow of 1000 m3/h.
  This applies not only to water, but also to chemical and non-viscous food liquids. For example, for oil, this criterion is much lower - not 1000, but 100 m3/hour.
• A driver with a 2nd category must be able to perform simple electrical work, service electrical and power plants. For pumping equipment, he must identify and fix problems and take part in the implementation of routine repairs.
• Installations with a capacity in the range of 1000 - 3000 m3 / h should be serviced by a 3rd category driver. Further, in ascending order: 4th category - stations with a capacity of 3000-10000 m3 / h; 5th category - 10000-15000 m3 / hour; 6th category - over 15,000 m3 / hour.

Finally, it should be said that persons under the age of majority are not allowed to work as a pumping unit operator.

JOB INSTRUCTIONS FOR THE PUMP INSTALLATION ENGINEER OF THE 4TH DIFFERENCE

I. General provisions

The driver of pumping units of the 4th category is directly subordinate to __________________.

The driver of pumping units of the 4th category follows the instructions of __________________.

The driver of pumping units of the 4th category replaces __________________.

The driver of pumping units of the 4th category is replaced by __________________.

Must know:
- device and design features of centrifugal, piston pumps, vacuum pumps and pipe pumps of various systems;
- arrangement and location of antechambers, pipelines, grids, wells and instrumentation;
- electrical engineering, hydraulics and mechanics;
- installation of serviced electric motors, alternating current and direct current generators, transformers, switchgear equipment, electrical networks and electrical appliances;
- rules for starting and stopping all equipment of pumping units;
- ways to eliminate malfunctions in the operation of equipment and eliminate accidents;
- rules and norms of labor protection, safety precautions (when servicing electrical installations in the scope of qualification group III) and fire protection.

_________________________________________________________________.

II. Job Responsibilities

Maintenance of pumping stations (substations, installations) equipped with pumps and pipe pumps of various systems with a total capacity of over 3,000 to 10,000 cubic meters. m/h of water, pulp and other non-viscous liquids.

Start regulation of the operating mode and stop of motors and pumps.

Maintenance of pumps and pumping units in the field and on construction sites with a pump capacity of over 1000 to 3000 cubic meters. m / h of water each and wellpoint and vacuum pumping units with a pump capacity of over 600 cubic meters. m/h each.

Maintenance of pumps and pumping units of coal mines with a total pump capacity of over 18,000 cubic meters. m/h methane-air mixture.

Control of ensuring the specified pressure of liquid, gas and pulp in the network of the serviced area.

Maintenance of transformer substations under the guidance of a driver of higher qualification.

Identification and elimination of malfunctions in the operation of pumping equipment, including electric motors and electrical circuits of process equipment.

Maintenance of power and lighting electrical installations over 1000 V.

Performing electrical work of medium complexity.

Regulation of the load of the electrical equipment of the site (substation).

Preparation of defective repair reports.

_________________________________________________________________.

_________________________________________________________________.

III. Rights

The driver of pumping units of the 4th category has the right to:

give assignments to subordinate employees, tasks on a range of issues included in his functional duties.

control the execution production tasks, timely execution of individual assignments by employees subordinate to him.

request and receive necessary materials and documents related to the issues of its activities and the activities of employees subordinate to it.

interact with other services of the enterprise on production and other issues that are part of its functional duties.

get acquainted with the draft decisions of the management of the enterprise regarding the activities of the Division.

propose for consideration by the manager proposals for improving the work related to the duties provided for in this Job Description.

submit proposals for the consideration of the head of the proposal on the promotion of distinguished employees, the imposition of penalties on violators of production and labor discipline.

report to the manager on all identified violations and shortcomings in connection with the work performed.

_________________________________________________________________.

_________________________________________________________________.

IV. Responsibility

The driver of pumping units of the 4th category is responsible for:

For non-performance (improper performance) of their official duties provided for in this job description, within the limits determined by the current labor law Ukraine.

For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.

For causing material damage - within the limits determined current labor, criminal and civil legislation of Ukraine.

_________________________________________________________________.

_________________________________________________________________.

JOB DESCRIPTION

ENGINEER OF PUMPING INSTALLATIONS OF THE WATER SUPPLY SHOP

1. SUBORDINATION

1.1. The pumping unit operator reports directly to the shift supervisor. The operator of pumping units of the lowest category reports to the operator of pumping units of the highest category according to the staffing table.

2. FACILITY OF SERVICE

2.1. The service facility for pumping unit operators includes:

Equipment listed in section 2 of the technological instructions VKh-T-2 and VKh-T-3;

Pipelines, valves, instrumentation and A, SBS schemes at this workplace, electrical equipment.

3. LIST OF INSTRUCTIONS, THE KNOWLEDGE OF WHICH IS MANDATORY FOR ENGINEERS OF PUMPING INSTALLATIONS OF THE WATER SUPPLY SHOP

3.1. IOT-1 - instruction on labor protection for workers.

3.2. IOT-GB-1 - instruction on labor protection in the organization and conduct of gas hazardous work.

3.3. IOT-2 - instruction on labor protection during repair, construction and installation work.

3.4. IOT-PB-2 - instruction on labor protection in the organization and conduct of hot work.

3.5. IOT-4 - instruction on labor protection during the operation of electrical equipment by technological personnel.

3.6. IOT-6 - instruction on labor protection during the operation of water supply and sewerage networks.

3.7. PB-1 - instruction on fire safety measures.

3.8. TB-8 - operating instructions for pressure equipment.

3.9. T-9 - instruction on monitoring compliance with the norms and parameters of technological regimes, accounting for technological violations, accounting for raw materials, finished products and intra-factory transfers of products.

3.10. TB-11 - instructions for the operation and repair of technological pipelines.

3.11. T-12 - instructions for technical operation buildings and structures.

3.12. TB-14 - operating instructions for pipelines of steam, hot water, steam condensate and heating of workshops.

3.13. T-15 - instructions for the safe performance of work by hoisting machines for slingers and persons using hoisting machines controlled from the floor.

3.14. IOT-16 - instructions for safe operation steam rooms.

3.15. IOT-17 - instructions for labor protection during the operation and repair of ventilation systems.

3.16. T-20 - instructions for assigning an electrical safety group to non-electrotechnical and electrotechnological personnel.

3.17. IOT-22 - instruction on labor protection when performing work at height.

3.18. TB-24 - instructions for the operation and repair of valves equipped with an electric drive.

3.19. VKh-IOT-2 - instruction on labor protection for the driver of pumping units of the water supply workshop.

3.20. VKh-T-2 - instructions for servicing pumping stations of water blocks S-6, S-7, S-8, S-7/2, S-8/2.

3.21. VKh-T-3 - instructions for servicing pumping stations S-5, S-7, S-7 / 2, S-23, S-55, S-58.

3.22. ВХ-ИОТ-5 - instructions for labor protection during the operation of high-voltage electric motors of the water supply workshop.

3.23. ВХ-ПБ-1 - instruction on fire safety measures in the water supply workshop.

3.24. Instructions on the interaction of personnel of the water department with PCh-17, PCh-20 during fires.

3.25. ВХ-Т-16 - operating instructions for ventilation systems of the water supply workshop.

3.26. VKh-T-20 - instructions for chlorination of industrial circulating water in the water supply workshop.

3.27. VKh-T-31 - instructions for the conservation of technological equipment of the water supply workshop.

3.28. Instructions for organizing the safe movement of vehicles and pedestrians on the territory of enterprises and organizations of MNP.

3.29. Occupational safety management system.

3.30. Regulations on the procedure for monitoring the work and accounting for failures of instrumentation and automation equipment (KIP and SA).

3.31. Rules for intra-object and access control.

3.32. Regulations on the procedure for organizing and carrying out work on safe shutdown for a long period and conservation of hazardous industrial facilities.

3.33. Regulations on the system for organizing work on the operation, maintenance and serviceability of the SBS (blocking and alarm systems).

3.34. Rules of the internal labor schedule of employees.

3.35. Instructions on safety measures when working with methanol at enterprises and organizations of MNP.

3.36. Instructions on technical investigation and accounting of incidents at JSC.

3.37. Accident elimination plan.

3.38. Regulations on the delimitation of functions for metrological support of production between workshops and divisions.

3.39. No. 1 - instruction "On the actions of employees in case of detection of a suspicious object or traces of penetration."

3.40. No. 2 - instruction "On the actions of employees in the event of receiving a telephone message containing a threat of a terrorist act during working hours."

Persons who have reached the age of 18, do not have medical contraindications, have a certificate of education, qualification or special knowledge in this profession, have been instructed, theoretical and practical training, internship and have passed the exam for admission to independent work.

4. RIGHTS

The pumping unit operator has the right to:

4.1. stop work in emergency cases, if further continuation of work creates a danger to others or threatens the safety of equipment;

4.2. demand the provision of protective clothing, means personal protection, a serviceable tool in accordance with the Model Industry Code, and deadlines socks;

4.3. take measures to prevent loss of working time, consumption of electricity, water;

4.4. demand from the shift supervisor to eliminate the noticed malfunctions.

5. RESPONSIBILITIES

The operator of pumping units is obliged to:

5.1. know and comply with the requirements of the instructions listed in section 3 of this manual;

5.2. follow the rules internal regulations JSC, observe labor and production discipline;

5.3. check before shift technological equipment, pipeline fittings, electrical equipment, technological pipelines, ventilation systems with the inclusion of the results of the inspection in the journal for the acceptance and delivery of shifts (work journal);

5.4..know the danger and harmfulness of the substances used when performing work at the workplace;

5.5. know the design of centrifugal, vacuum pumps, basic information on electrical engineering, hydraulics, mechanics, the design and location of instrumentation and A, the rules for starting and stopping pumping units, methods for troubleshooting equipment and eliminating accidents;

5.6. observe the established mode of conducting the technological process in accordance with the technological instructions;

5.7. to train the newly hired machinists assigned to him in the process of work in safe techniques and labor methods;

5.8. monitor the wearing by subordinate drivers of the issued overalls and special footwear, the use of the required protective equipment by them;

5.9. not allow unauthorized persons into the pump room;

5.10. comply with the requirements of instructions and rules on labor protection, fire and gas safety, industrial sanitation at workplaces and when performing one-time work;

5.11. at least once every three years to attend production and technical courses with the subsequent passing of exams;

5.12. in without fail undergo a medical examination and fluorographic examination;

5.13. Report to shift supervisor:

About identified malfunctions of pumping equipment, electrical devices, protective fences, instrumentation and A, about violations of the technological regime;

About cases of detection of inoperability of signaling and other protective anti-emergency devices;

About each case of injury, poisoning, fire or other incident at or near the work site;

5.14. know the emergency numbers:

Ambulance - 103;

Gas Rescue Service - 104;

Fire department - 101;

Dispatcher - __________.

6. RESPONSIBILITY

6.1. The pumping unit operator is responsible for the quality and timeliness of the fulfillment of the duties assigned to him by this job description in accordance with applicable law.