JOB INSTRUCTIONS FOR A ROAD WORKER OF THE 5TH DISTRIBUTION

I. General provisions

1. A road worker of the 5th category is appointed to a position and dismissed from office in the established current labor law by order of the head of the Organization.
2. The road worker of the 5th category is directly subordinate to __________________.
3. A person with _______ is appointed to the position of a road worker of the 5th category professional education and work experience in the specialty _______ years.
4. Must know:
   - state assessment methods pavement and artificial structures;
   - device and rules for the use of geodetic instruments;
   - methods of combating soil erosion;
   - ways to eliminate ice on the roads;
   - in the process of marking the road surface of motor roads:
   • main types and properties of paints, solvents and thermoplastic materials, methods for determining their viscosity and fluidity;
   • methods of applying paints and varnishes;
   • sizes of lines, arrows and inscriptions of horizontal markings;
   • the procedure for applying markings in combination with road signs or traffic lights;
   • technical requirements for road markings;
   • rules for applying marking materials in combination with retroreflective elements;
   - instruction on labor protection;
   - device and principle of operation of a mechanized tool for applying thermoplastic materials;
   - composition and technology of application of two-component plastic materials.
5. During the period of temporary absence of a road worker of the 5th category, his duties are assigned to __________________.
6. _________________________________________________________________.

II. Job Responsibilities

1. Performs complex work in the construction, repair and maintenance of roads, artificial structures on them and sidewalks:
   - Eliminates places of subsidence of road surfaces.
   - installs and repairs pipes, trays, heads, retaining walls and parapets.
   - fixes some damaged elements architectural design highways.
   - splits the stationing and road elements in the plan.
   - determines the height marks of road structures using geodetic instruments.
   - installs and repairs drainages and paving with the restoration of filters.
   - installs fencing and signaling devices.
   - fixes developing ravines.
2. When performing work on marking the road surface of roads:
   - applies lines of a pedestrian crossing of the "Zebra" type with paints and thermoplastic materials;
   - denotes islands separating traffic flows opposite directions, stenciled with spray guns;
   - applies arrows indicating the direction of movement along the lanes with two-component plastics, retroreflective elements with a pneumatic gun, marking the vertical surfaces of supports, bridges, overpasses, end surfaces of portals, tunnels, parapets.
3. Works with the use of paints and varnishes.
4. _________________________________________________________________.
5. _________________________________________________________________.

III. Rights

1. Request and receive necessary materials and documents related to the issues of its activities.
2. Engage in relationships with departments of third-party institutions and organizations to resolve operational issues production activities within its competence.
3. _________________________________________________________________.
4. _________________________________________________________________.

IV. A responsibility

1. failure to fulfill their functional duties
2. inaccurate information about the status of the work.
3. failure to comply with orders, instructions and instructions of the head of the Organization.
4. failure to take measures to suppress the identified violations of safety regulations, fire and other rules that pose a threat to the activities of the enterprise and its employees.
5. failure to ensure compliance with labor discipline.
6. _________________________________________________________________.
7. _________________________________________________________________.

Characteristics of works.

What should know:

• design, purpose and principle of operation of assembled complex mechanisms, devices, units, machines and machines
• technical conditions for adjustment, testing and delivery of assembled units of machines and assemblies and their operational data
• assembly and adjustment techniques for machines and test modes
• measures to prevent deformation of parts
• rules for checking machine tools for accuracy.

Work examples

1. Stationary and distributive mechanical interlocking devices - assembly and adjustment.
2. Locking and adjusting equipment for chemical industries high pressure - disassembly, adjustment, lapping, assembly.
3. Valves spool - lapping and finishing of sealing surfaces.
4. Propeller and stern shafts - scraping of cones and fitting of keyways according to caliber.
5. Differential rollers of special design - sawing of support planes perpendicular to the axis with a perpendicularity tolerance of 0.02 mm.
6. Propellers for shafts - fitting the hub to the cone of the shaft or to the caliber.
7. Liners - fit and scraping in the turbine housing.
8. Air ducts of all types - control assembly and alignment.
9. Gyroscopes - preliminary and final assembly.
10. Internal combustion engines with power over 736 to 1472 kW (over 1000 to 2000 hp) - assembly, adjustment and adjustment.
11. Diffusers - fitting and pressing into the steam box and into the turbine housing.
12. Carriage retarders of all types - assembly, adjustment and maintenance in good condition.
13. Calibers of propeller shafts and propellers with two or more keyed connections, with the installation of keys in any position relative to the grooves - scraping and fitting the cone with keys.
14. Frames for radio devices made of profile steel with more than 50 incoming parts - assembly.
15. Frames and casing for turbines - manufacturing.
16. Carousels, vacuum fittings - assembly.
17. Valves and covers impulse of all types and sizes - assembly.
18. Control valves, double with a servomotor and with a double system of levers - assembly, adjustment.
19. Protective control valves - assembly, adjustment.
20. Valves, clinkets and gate valves with planetary gear drive - assembly, adjustment, delivery.
21. Main shunting valves for all types of ships - assembly, adjustment.
22. Steam valves with remote control - assembly.
23. Clinkets with a split wedge with nominal bore over 875 mm - assembly, delivery.
24. Kingstons and gate valves with pneumatic and hydraulic actuators - assembly, adjustment, delivery.
25. Compressors and drying units (BO) with gas supply under pressure over 230 kgf/sq. cm up to 400 kgf/sq. cm - installation (connection of bench devices, valves, sensors, etc.), identification and elimination of defects that arose during testing.
26. Complex metal structures: panels, rafts, slabs, etc. for non-standard experimental technological equipment- manufacturing.
27. Wheels digital and letter - replacement.
28. Piston rings of a six-ton ​​steam valve - filing.
29. Piston rings with a diameter of more than 400 mm - adjustment of the lock.
30. Piston rings with a diameter of more than 550 mm - scraping the ends and fitting to the piston.
31. Cases of vacuum valves and pumps, chemical equipment installations - assembly.
32. Cases of the main and central devices, consisting of sections - assembly and connection of sections with each other with the processing of places for mechanisms.
33. Cases of devices are complex from various materials - assembly with the manufacture of individual elements.
34. Grinding wheels with a diameter of more than 750 mm - assembly, testing, balancing.
35. Covers - fitting on the turbine housing.
36. Lines of numbers in the numbering apparatus - adjustment and correction during assembly and repair.
37. Shafting line for all types of ships, except for boats - mating, installation on a machine (bench), reaming of holes, fitting bolts, assembly, delivery.
38. Gravure printing machines - assembly.
39. Horizontal forging machines with pressure force up to 20 MN - general assembly.
40. Self-propelled agricultural machines - final assembly.
41. Mine-hoisting machines with a bicylindrical drum - general assembly and adjustment with testing.
42. Auxiliary ship mechanisms - commissioning.
43. Lifting-anchor mechanisms - assembly, testing and delivery.
44. Mechanisms and fittings for remote control of ship and ship systems with electric, pneumatic and hydraulic servo drives - grinding, assembly and adjustment.
45. Complete threshers - testing, running in and delivery.
46. Steam hammers - assembly, checking of steam distribution spools and valves, piston stroke, control mechanisms.
47. Couplings and half-couplings of ship shafts - scraping the cone, cutting the keyways according to the caliber.
48. Elastic couplings of the main shaft line - assembly, balancing.
49. Guides with a triangular groove, hardened up to 340 mm long - lapping with a tolerance of +/- 0.01 - 0.02 for parallelism by 300 mm.
50. Gear pumps for various purposes and performance - assembly, testing, delivery.
51. Hollow blade packages - assembly and fitting.
52. Rudder blade and stock with a flanged connection - scraping the planes of the flanges, assembling the connection, aligning the centerline, reaming holes, fitting keys, bolts and pins, delivery.
53. Rudder blade with baller - scraping of cones and keyways, fitting of keys, assembly, delivery.
54. Planes, cams - processing according to the 1st class of accuracy with certification of dimensions.
55. Planes - scraping and adjusting bores for liners.
56. Pneumatic couplers of the SPU-20 type, pneumatic wrenches of the GPU-80 type - assembly.
57. Compensator flange surfaces - scraping with an accuracy of at least 2 spots per sq. cm.
58. Rolling and combined bearings - assembly.
59. Hydraulic presses with a force of over 30 to 100 MN - assembly, adjustment, testing, delivery.
60. Control panels and other complex automatic stations - complete production and assembly (without installation).
61. Rollers diamond complex profile - balancing.
62. Rotors - static and dynamic balancing.
63. Rotors, turbines - assembly, installation of thrust bearings.
64. Rotors - assembly of blades with shroud fastening.
65. Servo motors - blocking assembly.
66. The beds of longitudinal milling and other machines - installation on shoes with alignment to the water level and a string with an optical device.
67. Beds of unique and precision machine tools - scraping guides.
68. Precision lathes - scraping carriage and caliper.
69. Screw-cutting lathes - testing the machine for power with adjustment and adjustment, testing for accuracy with adjustment, adjustment and correction of defects.
70. Experimental turbocompressors, air and oxygen compressors - final assembly, adjustment and delivery.
71. Knots, mechanisms, structures of large vessels - installation using plastics.
72. Knots of pneumojacks of impact action - assembly, adjustment.
73. Complex nodes, units and machines of experimental designs - assembly and testing.
74. Complex knots and aggregates of passenger cars of the highest class - assembly, adjustment, testing.
75. Gas turbine plants - assembly.
76. Rudder shifting devices - assembly, adjustment, delivery.
77. Perforation control device - final processing of incoming parts after hardening, centering of punches on dies in compliance with dimensions within tolerances of up to 0.01 mm.
78. Centrifuges - grinding of a shaft with a rotor and sealing rings, assembly, adjustment and testing.
79. Crane connecting rods and regulators, water feed pump housings, jacks - assembly.
80. Gears assy - static and dynamic balancing.
81. Electric spires, spire driving mechanisms - assembly.
82. The probe after hardening is pressed into the guide with a parallelism tolerance of +/- 0.01 per 120 mm of length.
83. Eccentrics - final locksmith processing after hardening with the removal of tables on the comparator.
84. Electric guns of blast furnaces - disassembly, assembly.

Instruction

If a person first gets a job and has a document on education, then tariff category assign it on the basis of this document. The category indicated in the document on education has already been confirmed by the state qualification commission educational institution in accordance with the level of theoretical and vocational training worker and the results of qualifying exams.

Put down the assigned category in the documents for employment (employment contract, order for employment, personal card of the employee, work book).

If a person gets a job for the first time and does not have a document on education, then assign the lowest rank to such a worker - 1st or 2nd.

Open the Unified Tariff and Qualification Guide (ETKS), select the industry, ETKS issue, select a profession, characteristics of work of the 1st and 2nd category, compare with the work that will be assigned to the employee, assign the category -1st or 2nd. Put down the tariff category in the documents on employment. In the future, increase the rank of the worker and assign more complex work in the process labor activity.

If you need to determine the category of a worker without a document on education, but having work experience in this profession, then in this case, see the entry in the work book of the employee from the previous place of work. When applying for a job, assign a rank to such a worker in accordance with this entry.

In the process of labor activity, the tariff category for a worker can be increased. The increase in ranks in this case is carried out by a qualification commission created by an order for the enterprise. The commission usually includes the heads of the workshop, section, employees of the department of industrial training, the personnel department, and the department of remuneration.

So, it is necessary to increase the tariff category of the worker. Ask the worker to submit a statement endorsed by the head of the unit (foreman, head of the section, shop), ask the head of the section, shop to write a presentation or description of this worker.

Inform the commission about the need to conduct a qualifying examination.

During the exam, the worker must answer the theoretical questions that are spelled out in the sections of the unified tariff and qualification reference book "job description" and "should know" the category for which he claims.
During the practical part of the exam, the worker must perform trial work corresponding to the level of the declared qualification.

According to the knowledge and skills of the worker, the qualification commission makes a decision: to assign or not to assign a new category. The decision of the commission shall be communicated to the employee immediately after the vote. Next, draw up a protocol of the commission, in which the assessment is affixed (excellent, good, satisfactory, unsatisfactory) and the result of the commission's decision is noted.

Sign the protocol by the members of the commission and keep it together with the employee's application in his personal file. Based on the protocol, assign a new rank to the employee and make a note about this in work book and personal card of the employee, issue changes to the documents on remuneration.

1.1. A road worker of the 5th category is a worker and reports directly to ……… (name of the position / profession of the manager)

1.2. To work as a road worker of the 5th category, a person is accepted:

1) having a secondary vocational education;

2) who has mastered the training programs for skilled workers, employees;

3) past professional education on professional training programs for the professions of workers, positions of employees, programs for retraining workers, employees, advanced training for workers, employees (up to 1 year);

4) having at least 1 year of experience as a road worker of the 4th category;

5) having no medical contraindications.

1.3. A road worker of the 5th category is allowed to work on an asphalt paver provided that he reaches the age of 18 years.

1.4. A road worker of the 5th category should know:

1) documents, objects, methods and techniques for performing work of a lower qualification, provided for by production (by profession) instructions and (or) professional standard;

2) types of fences and rules for their placement;

3) types, basic properties of road building materials and requirements for their quality;

4) requirements for the quality of work:

On the arrangement and maintenance of roads and artificial structures on them;

Repair of roads and artificial structures on them;

By marking the road surface and vertical elements of the road;

Installation of prefabricated reinforced concrete road and airfield slabs;

Installation of steel and cast iron plates;

5) device and rules for the use of a geodetic instrument;

6) rules and ways:

Construction and operation of pavement;

Devices for pipes, trays, heads, retaining walls and parapets;

Drainage and paving devices with filter restoration;

Repair of drainage and paving with the restoration of filters;

Correction of individual damage to the elements of the architectural design of roads;

Application of paints and varnishes;

Fastening and installation of reinforced concrete road and airfield slabs;

Controlling the compaction of sand with a level or a rope pendulum;

Filling joints between slabs with cement mortar or concrete;

Fastening and installation of steel and cast iron plates;

Concrete layer devices;

Laying steel and cast iron surfaces;

Slab settling and slab settling control;

7) main types and properties of paints, solvents and thermoplastic materials, methods for determining their viscosity and fluidity;

8) dimensions of lines, arrows and inscriptions of horizontal markings;

9) the procedure for marking in combination with road signs or traffic lights;

10) rules for applying marking materials in combination with retroreflective elements;

11) the device and principle of operation of small-scale mechanization for the application of thermoplastic materials;

12) composition and technology of application of two-component plastic materials;

13) rules for the operation of manual, mechanized tools and small-scale mechanization equipment used in the performance of a labor function;

14) types, types and purpose of measuring, manual and mechanized working tools and small-scale mechanization tools to perform a labor function;

15) terminology in the field of construction in relation to the implementation of:

Auxiliary work in the construction of highways, installation of artificial structures on highways;

Repair of road surfaces and artificial structures on highways;

Works on horizontal marking of pavement elements and vertical marking of road elements with thermoplastic materials using small-scale mechanization;

Installation of steel and cast iron plates;

Installation of prefabricated reinforced concrete road and airfield slabs;

16) methods for assessing the condition of road surfaces and artificial structures;

17) purpose and types:

Prefabricated reinforced concrete road and airfield slabs;

Steel and cast iron plates;

18) Rules traffic in the production of road construction and repair work;

19) rules for providing first aid to the victim;

20) requirements of labor protection, fire and environmental safety when doing work;

21) rules for the use of personal protective equipment;

22) ……… (other requirements for the necessary knowledge)

1.5. A road worker of the 5th category must be able to:

1) perform work (operations, actions) at lower levels;

2) maintain the condition of the workplace in accordance with the requirements of labor protection, fire, industrial and environmental safety;

3) use manual, measuring tool and means of small-scale mechanization to perform the labor function;

4) take readings from a geodetic instrument when determining the elevations of road structures;

5) use techniques:

Breakdown of the stationing and road elements in the plan;

Determination of elevation marks of road structures using a geodetic instrument;

Installation of pipes, trays, caps, retaining walls and parapets, drainage and paving with filter restoration;

Elimination of places of subsidence of road surfaces;

Repair of pipes, trays, heads, retaining walls and parapets;

Application of horizontal markings and designation of road elements, retroreflective elements;

Marking vertical surfaces of supports, bridges, overpasses, end surfaces of portals, tunnels, parapets;

Detection of prefabricated reinforced concrete road and airfield slabs;

Road elevation marks;

Control of sand compaction with a level or a rope pendulum;

Laying reinforced concrete road and airfield slabs;

Alignment of the front surface; filling joints between plates;

Detection of steel and cast iron plates;

Marks of the height level of coverage;

Interlayer devices made of fine-grained concrete;

Laying of steel and cast iron plates;

Slab deposition and control of the deposition process;

Removal of excess concrete from the seams formed by the joints of the slabs;

6) to carry out the correction of damage to the elements of the architectural design of roads;

7) use paint and varnish and thermoplastic materials, two-component plastics;

8) carry out visual inspection of prefabricated reinforced concrete road and airfield slabs;

9) prevent actions that may lead to an accident and/or emergencies;

10) apply personal protective equipment;

11) comply with the Rules of the road, labor protection, fire and environmental safety in the course of work;

12) provide first aid to the victim;

13) ……… (other requirements for the necessary skills)

1.6. ……… (other general provisions)

2. Labor functions

2.1. The labor functions of a road worker of the 5th category are:

2.1.1. Performing complex work in the construction, repair and maintenance of roads, artificial structures on them and sidewalks, work on the installation of prefabricated elements of the road structure:

1) performance of auxiliary works in the construction of motor roads, arrangement of artificial structures on motor roads;

2) repair of road surfaces and artificial structures on highways;

3) performance of works on horizontal marking of pavement elements and vertical marking of road elements with thermoplastic materials using small-scale mechanization;

4) installation of prefabricated reinforced concrete road and airfield slabs;

5) installation of steel and cast iron plates.

2.1.2. Management of road workers of lower qualification (rank).

2.2. ……… (other functions)

3. Responsibilities

3.1. Before the start of the working day (shift), a road worker of the 5th category:

1) undergoes a pre-shift (preventive) medical examination in accordance with the established procedure;

2) receives a production assignment;

3) passes, if necessary, briefing on labor protection;

4) accepts the shift;

5) checks the serviceability of devices, tools, inventory and personal protective equipment;

6) ……… (other duties)

3.2. In the process of work, a road worker of the 5th category:

1) performs the work for which he was instructed and allowed to work;

2) uses overalls, footwear and other personal protective equipment;

3) receives instructions from the immediate supervisor on the performance of the task, safe methods and methods of work;

4) comply with the rules for the use of technological equipment, fixtures and tools, methods and techniques for the safe performance of work;

5) immediately notify the immediate supervisor of all shortcomings found during work;

6) comply with the requirements of personal hygiene and industrial sanitation;

7) ……… (other duties)

3.3. During the working day (shift), a road worker of the 5th category performs the following duties within the framework of labor functions:

3.3.1. As part of the labor function specified in subparagraph 1 of paragraph 2.1.1 of this instruction:

1) perform preparatory and final operations in the production of auxiliary work in the construction of roads;

2) carries out the installation of artificial structures on highways;

3) makes a breakdown of the stationing and road elements in the plan;

4) determines the height marks of road structures using a geodetic tool;

5) Exercise device:

Ogolovkov;

retaining walls;

Parapetov;

6) prepares the tool for work.

3.3.2. As part of the labor function specified in subparagraph 2 of paragraph 2.1.1 of this instruction:

1) perform preparatory and final operations in the production of auxiliary work in the repair of road surfaces and artificial structures on highways;

2) carry out the elimination of places of subsidence of road surfaces;

3) carries out repairs:

Ogolovkov;

retaining walls;

Parapetov;

Drainage and paving with filter restoration;

4) repair individual damage to elements of the architectural design of roads;

5) prepares the tool for work.

3.3.3. As part of the labor function specified in subparagraph 3 of paragraph 2.1.1 of this instruction:

1) perform preparatory and final operations in the production of auxiliary work in the implementation of marking work;

2) carries out the application of horizontal markings and designations of the elements of the highway, retroreflective elements;

3) performs marking of vertical surfaces of supports, bridges, overpasses, end surfaces of portals, tunnels, parapets.

3.3.4. As part of the labor function specified in subparagraph 4 of paragraph 2.1.1 of this instruction:

1) perform preparatory and final operations in the production of installation of prefabricated reinforced concrete road and airfield slabs;

2) lays reinforced concrete road and airfield slabs on the prepared surface;

3) levels the front surface.

3.3.5. As part of the labor function specified in subparagraph 5 of paragraph 2.1.1 of this instruction:

1) performs preparatory and final operations in the production of installation of steel and cast iron plates;

2) lays steel and cast iron plates in width on freshly laid concrete;

3) carries out the settling of slabs and control of the settling of slabs by vibrators or hammer blows.

3.3.6. As part of the labor function specified in clause 2.1.2 of this instruction:

1) issues shift assignments to road workers of a lower qualification (rank);

2) organize and coordinate the work of road workers of lower qualification (category);

3) gives instructions and explanations on the performance of work by road workers of a lower qualification (category);

4) exercise control over the quality of work performed by road workers of a lower qualification (category).

3.4. At the end of the working day (shift), a road worker of the 5th category:

1) brings devices, tools into proper condition, transfers them for storage;

2) removes dirt from overalls and safety shoes, if necessary, places them for drying and storage;

3) submits the established reporting;

4) performs an inspection (self-examination);

5) hand over the shift;

6) ……… (other duties)

3.5. As part of the performance of their labor functions, a road worker of the 5th category:

1) executes the instructions of his immediate supervisor;

2) passes periodic medical examinations(examinations), as well as extraordinary medical examinations (examinations) in established by law Russian Federation okay;

3) ……… (other duties)

3.6. ……… (other terms of duty)

4. Rights

4.1. When performing his labor functions and duties, a road worker of the 5th category has labor rights stipulated by the concluded with the employee employment contract, Rules of internal work schedule, local regulations, the Labor Code of the Russian Federation and other acts of labor legislation.

4.2. ……… (other worker rights provisions)

5. Responsibility

5.1. A road worker of the 5th category is subject to disciplinary liability in accordance with Art. 192 Labor Code Russian Federation for improper performance through his fault of the duties listed in this instruction.

5.2. Road worker of the 5th category carries liability for ensuring the safety of the inventory items entrusted to him.

5.3. A road worker of the 5th category for committing offenses in the course of his labor activity, depending on their nature and consequences, is brought to administrative and criminal liability in the manner prescribed by law.

5.2. ……… (other liability provisions).

6. Final provisions

6.1. This manual has been developed on the basis of professional standard"", approved by the Order of the Ministry of Labor and Social Protection of the Russian Federation of December 22, 2014 N 1078n, taking into account ... ... ... (details of the organization's local regulations)

6.2. Familiarization of the employee with this job description is carried out upon employment before signing the employment contract.

The fact of acquaintance of the employee with this job description is confirmed by ……… (signature on the familiarization sheet, which is an integral part of this instruction, in the journal of familiarization with job descriptions; in a copy job description kept by the employer; otherwise)

6.3. ……… (other final provisions).

The form has been prepared using legal acts as of 10/26/2010.

Compiled in ___ copies. I approve
_______________________________
(initials, surname)
_________________________________ _______________________________
_______________
_________________________________ _______________________________
(name of employer, (manager or other person
its organizational and legal authority to approve
form, address, telephone, address job description)
Email, OGRN, TIN / KPP)
"___"______ ___ N _____ "___"_________________ ___
JOB DESCRIPTION
road worker of the 5th category
(for organizations performing construction,
assembly and repair works)
1. GENERAL PROVISIONS
1.1. This job description defines the functional duties, rights and responsibilities of a road worker of the 5th category "______" (hereinafter referred to as the "Organization").
1.2. A road worker of the 5th category is appointed to the position and dismissed from the position in accordance with the procedure established by the current labor legislation by order of the head of the Organization.
1.3. The road worker of the 5th category reports directly to the __________ Organization.
1.4. A person with _______ vocational education and _______ years of work experience in the specialty is appointed to the position of a road worker of the 5th category.
1.5. A road worker of the 5th category should know:
- methods for assessing the condition of road surfaces and artificial structures;
- device and rules for the use of geodetic instruments;
- methods of combating soil erosion;
- ways to eliminate ice on the roads;
- in the course of work on marking the road surface of highways: the main types and properties of paints, solvents and thermoplastic materials, methods for determining their viscosity and fluidity; methods of applying paints and varnishes; sizes of lines, arrows and inscriptions of horizontal markings; the procedure for applying markings in combination with road signs or traffic lights; technical requirements for road markings; rules for applying marking materials in combination with retroreflective elements;
- device and principle of operation of a mechanized tool for applying thermoplastic materials;
- composition and technology of application of two-component plastic materials.
1.6. During the period of temporary absence of a road worker of the 5th category, his duties are assigned to ____________________.
2. FUNCTIONAL RESPONSIBILITIES
A road worker of the 5th category performs complex work in the construction, repair and maintenance of roads, artificial structures on them and sidewalks.
Example types of work:
Elimination of places of subsidence of road surfaces.
Installation and repair of pipes, trays, heads, retaining walls and parapets.
Correction of individual damage to the elements of the architectural design of roads.
Breakdown of the stationing and road elements in the plan.
Determination of elevations of road structures using geodetic instruments.
The device and repair of drainages and pavings with restoration of filters.
Installation of fencing and signaling devices.
Fixing developing ravines.
When performing work on marking the road surface of highways: drawing lines of a pedestrian crossing of the "Zebra" type with paints and thermoplastic materials; designation of islands separating traffic flows of opposite directions, using a stencil using spray guns; application of arrows indicating the direction of movement along the lanes, with two-component plastics, retroreflective elements with a pneumatic gun, marking the vertical surfaces of supports, bridges, overpasses, end surfaces of portals, tunnels, parapets; production of works with the use of paints and varnishes.
3. RIGHTS
A road worker of the 5th category has the right to:
3.1. Request and receive the necessary materials and documents related to the activities of a road worker of the 5th category.
3.2. Enter into relationships with departments of third-party institutions and organizations to resolve operational issues of production activities that fall within the competence of a road worker of the 5th category.
4. RESPONSIBILITY
The road worker of the 5th category is responsible for:
4.1. Failure to fulfill their functional duties.
4.2. Inaccurate information about the status of the work.
4.3. Failure to comply with orders, orders and instructions of the head of the Organization.
4.4. Failure to take measures to suppress the identified violations of safety regulations, fire and other rules that pose a threat to the activities of the enterprise and its employees.
4.5. Failure to comply with labor discipline.
5. WORKING CONDITIONS
5.1. The mode of work of a road worker of the 5th category is determined in accordance with the Internal Labor Regulations established in the Organization.
5.2. In connection with the production need, a road worker of the 5th category is obliged to go on business trips (including local ones).
5.3. In accordance with ____________________, the employer evaluates the performance of the road worker of the 5th category. The set of measures for evaluating the effectiveness was approved by _________ and includes:
- _____________________,
- _____________________,
- _____________________.
The job description was developed on the basis of _______________________
__________________________________________________________________________.
(name, number and date of the document)

Head of structural
divisions
____________________________ _____________________
(initials, surname) (signature)
"___"________ ___ G.
Agreed:
legal service
____________________________ _____________________
"___"________ ___ G.

Familiarized with the instructions:
(or: instruction received)
____________________________ _____________________
(initials, surname) (signature)
"___"________ ___ G.