A company known as Minamoto Aluminumcorp has been producing alloy wheels called Yamato for several years. Harmony and minimalism are the main qualities that matter to this manufacturer. Disks "Yamato" have become popular among manufacturers around the world. Perfect coloring is the main, but not the only advantage. About where Yamato discs are produced and in what sizes, as well as about their other features, is described in this article.

The company was first established in 2008. At that time, there were few manufacturers on the market capable of offering quality products at an affordable price.

Yamato brand

Minamoto Aluminumcorp's technological solutions have made it possible to reduce the price of discs without compromising the final quality. The basis of the result is the application of high pressure aluminum casting technology.

This development was called Flow Forming, then all models began to be made with it.

Key features and benefits

Can be listed the following features typical for tires of this manufacturer:

• High level of strength.
• Beautiful appearance.
• Protection against any aggressive environmental influences.
• Lightweight yet agile design.
• Large selection of alloy wheels in appearance, sizes.

Design, design process

Disk from "Yamato"

The development of the original appearance is carried out by a division called Japan City Design. Painting is carried out only with the use of modern materials. The main production plants are located in China.

The preliminary stage includes the creation of blanks from light-alloy materials, which are processed at high temperatures. Only after that the product is sent under the press, during the processing of which the final form appears. The Yamato Nomura series was no exception, the discs of which correspond to modern requirements to operation.

About Tests and Measurements

One of the stages of disk processing is multi-stage cleaning from various impurities. Otherwise, finished products will not meet the high quality standards that are required in this country.

Literally everyone controls the detection of marriage production stage. The company has long been known for high quality standards.

Given official parameters, mounting holes are observed with maximum accuracy. Discs are completely cleaned of small scratches before applying the final coat of paint. To do this, polishing is carried out using fine sand.

Production

The internal structure of the discs is compressed using hot stamping technology. Due to this, the grains of the alloys are connected to each other. This allows you to keep one direction for the internal parts of the structure. Cavities and shells from the structure of the alloys are completely removed. The metal becomes thinner and lighter while undergoing this treatment. But at the same time, additional strength appears, if done correctly.

Note!

The dynamic performance of the car is improved due to the fact that the discs have reduced weight. Thanks to this, the condition of the nodes and suspension elements is also ideally preserved.

Casting blanks

Full compliance with technology is guaranteed. Surrogate production methods are excluded, as are metal alloys with reduced quality. The cost of the product is the same as that of premium alloy wheels. When casting blanks, automatic lines with several presses are used. This is how the Yamato Shogun series is also produced, the disks retain their parameters for a long time.

Quality assurance

The minimum warranty from the manufacturer is 12 months. If real branded rubber is purchased, then the probability of stumbling upon a marriage is small, reduced to almost zero.

Features of choosing Yamato discs

The sizes of disks and weight of this company are very diverse:

• 18 inches and 8 kg.
• 17 inches and 7 kg.
• 16 inches and 5.95 kg.
• 15 inches and 5 kg.
• 14 inches and 4.4 kg.

Note!

Together with the decorative coating, the manufacturer uses a special protective coating. Therefore, during operation, you can not worry about rapid wear.

There is also the so-called "Yamato Shogun" series. It differs from analogues by improving aerodynamic performance. The rims reduce the overall pressure on the suspension through the use of lightweight alloys. Additional thermoregulation is provided through the use of knitting needles with different widths.

Producing country

Marking products will allow you to quickly determine the country of origin.

On a note!

Usually this information is indicated on the packaging, in accompanying documents. The marking of disks is more often devoted to overall dimensions, the presence of certain spare parts. This rule is followed by all Japan Samurai products.

About the main models of alloy wheels

Here are just some of the benefits for buyers of this series:

• Ordering incomplete sets, for example, from 1 or 5 pieces. If necessary, the manufacturer and partner factories agree to ship any quantity of products.
• Strength. The discs withstand even the toughest operating conditions, remain intact after accidents.
• Original design.
• High quality painting.
• Quality casting.

As for the main models of Yamato alloy wheels, they all have the above advantages.

In stores you can find options with names:

• Akita.
• Aoki.
• Asakura.
• Fukuoka.
• Hamaguti.
• hoshi.
• Imagava.
• Itadaki.
• Kuoka.
• Mitaki.

Interesting!

Many buyers appreciate the rich color scheme at these products.

The same applies to the Yamato Samurai series, the discs from which are in constant demand.

Forged wheels Yamato

We are talking about the Segun line. Smooth design lines are perfectly combined with lightness and strength. We can say that in this variety the advantages of both types of disks converged. Flow Forming - innovative technology that allows you to achieve unique results in production.

And there are several names here:

• Aketi Mitsihidae.
• Akita wheel.
• Aoki.
• Asakura.
• Lida.
• Imagawa.
• Inori Tokugana.
• Kahei.
• Kataki.
• Kuoka.

They have almost the same properties, differ only in size. The catalog contains many more models, everyone will find to their taste.

Many people know the company Yamato, whose discs have been in great demand for more than a year. At the cost of the product remain affordable, the quality is able to maintain throughout the entire operational period. There should be no problems with replacement and dismantling if the owner takes into account the features of his car in advance, selects the dimensions correctly.

Yamato wheels are Japanese products. And in this country, as you know, there is nothing that would not have tradition and philosophy under it.

Yamato is the name of the tribe that ultimately gave rise to all of Japan. And then in the Land of the Rising Sun, this was the name of the dynasty of masters who were engaged in the creation of the best katanas. It was the people from this family who organized the production of high-quality castings for cars.

Today we offer you to buy Yamato alloy wheels as products with impeccable performance.

This attractive Japanese conciseness

First of all, I would like to talk about the designs in which Yamato casting is presented. The exteriors of these wheel models are created by JAPANCITYDESIGN. Designers adhere to the principles of conciseness and harmony. True beauty is something in which everything necessary is present, but there is nothing superfluous. This is a true Japanese style, which is so loved and recognizable around the world.

The model range of these autodisks is presented in various colors. You can choose the option that will be an excellent finishing touch to the appearance of your car.

You can talk about this for a long time. Better to see it for yourself. Just look at the photos of the Yamato rims presented on this page.

Quality Level

The Yamato wheels we sell are of impeccable quality:

• for their production, light aluminum alloys of high purity are used;
• modern low-pressure casting technology allows you to get perfectly smooth and balanced wheels;
• the manufacturer uses only the best paint and varnish coatings: they are reliably protected from mechanical damage, temperature and chemicals.

As a result, by purchasing these products, you can be sure that they will serve reliably and for a long time.

Where is the best place to buy Yamato castings?

Our online store of Yamato alloy wheels in Moscow offers you the most popular models and the most popular sizes. With us you can:

• quickly and easily select the right rims, having previously read their photos, descriptions, and looked at the prices;
• use, if necessary, a disc selection calculator and the services of an online consultant;
• buy yamato rims favorable price: we offer you products from a warehouse, not from resellers;
• receive goods in any city of Russia with a transport company.

Take advantage of our offer right now!

For a long time, the Japanese company Minamoto Aluminumcorp has been producing alloy wheels called Yamato. The design of such a product is based on harmony and minimalism. Yamato rims are popular all over the world. They are distinguished by perfect coloring. They are made of aluminum High Quality, cast in accordance with the technological process FLOW FORMING.

The core is made by casting, the rims are forged. Therefore, this product is highly durable.

Special design firm Japan City Design is developing the original design. In production, the latest technological processes of painting are used, thanks to which the products are very beautiful and durable.

They are not afraid of aggressive environments and mechanical influences, they are characterized by increased impact resistance.

The combination of casting technology with the forging process has resulted in a lightweight and highly manoeuvrable structure, on which the car moves easily and comfortably.

Today, the main production plants are located in China, and the plant located in Japan is still functioning.

The Yamato range of discs is very diverse both in terms of size and design. The product is produced with a diameter of R16 - R20. The most popular are R16 - R17. In Russia, the cost of a disc ranges from 2,500 to 4,500 rubles. It all depends on the model, as well as its overall dimensions.

Advantages of Yamato

• Very light
• They are highly manoeuvrable,
• There is no fading of the paint coating,
• high impact resistance,
• Improved wear resistance
• Not a very high price.

Motorists speak of these discs only on the positive side.

It is quite difficult to translate the word Yamato into Russian. As the Japanese themselves say, this can mean something very close to the phrase "Japanese spirit." This is roughly the same as translating to foreign language concept of "Russian soul".

Yamato Segun

These alloy products are produced by the Japanese concern Minamoto Aluminum. Products are distinguished by their unique performance. Yamato Segun products are considered the lightest in comparison with analogues. Products can be called the pinnacle of creativity of Japanese engineers.

Discs are manufactured according to the latest technological process flow forming. Thanks to this cutting-edge technology, it became possible to combine a cast center with a forged rim.

This design has collected the best properties of forged wheels. Light weight combined with high strength. Casting is characterized by smooth lines. Beautiful design gives the structure a unique look.

Wheel design Yamato Segun develops japanese firm Japan city design. Akzo Nobel created special protection for these discs, together with a decorative coating. The result is a structure that is resistant to aggressive environments, withstanding high mechanical stress.

dimensions

Disk sizes, as well as weight, have a wide range:

• 14 inches - 4.4 kg;
• 15 inches - 5 kg;
• 16 inches - 5.95 kg;
• 17 inches - 7 kg;
• 18 inches - 8 kg.

Among the advantages of Yamato Segun are improved maneuverability and easy control, quick start, instant braking. As well as noiselessness, high strength, low weight, attractive appearance.

Comparison of Kik and Yamato Tiguma discs

Similar to the Yamato Shogun, the Yamato Tiguma models combine sleek design, light weight and high reliability. The design differs from analogs in high aerodynamic characteristics.

Aluminum alloy rims reduce pressure on the suspension and facilitate the braking system. Thanks to the knitting needles of different widths, additional thermoregulation occurs.

Motorists who use Yamato Tiguan models talk about making the car easier to drive. Maneuverability has increased significantly. The discs are made on very precise equipment, so they are easy to balance.

Japanese casting is performed using Flow Forming technology. This made it possible to reduce the weight of the wheel by about 20%, and increase the strength of the aluminum alloy by 40%. The coating is made from special paints with protective properties. The discs are not afraid of moisture, they are neutral to aggressive environments.

Russian Kik discs are also made according to Japanese technology (that is, they are in no way inferior to the Japanese in terms of technical characteristics), but taking into account the off-road that is traditional for Russia. However, it is difficult to say unequivocally that they are superior to Yamato Tiguma discs in terms of their characteristics.

Which disk to install on your car, only the driver decides. But you must always remember that Japanese quality still considered the best in the world.

The company was founded at the beginning of the last century. Specialization in the production of accessories and mechanisms for cars did not appear immediately. But initially, the creators headed for decent quality and prestige. This is not surprising, because the brand name is translated as "Japan" in the old version of the language.

Yamato brand features

To date, the assortment includes more than 2000 different items. And these are not only Yamato discs, but also much more. By the way, the developers especially focus on the fact that the products are suitable for cars of any make, including Korean, European, American.

The creators do not pursue interesting external visual effects, but prefer conciseness of forms, minimalism. Over the years, our own patented developments have been created, thanks to which Yamato discs are immediately recognizable. To some users, they resemble a spinning samurai sword. This is achieved by forging the rims of the disk, and casting the central part, resulting in interesting overflows that remind many of samurai swords.

Recognizable design is the "trick" of the brand. Recognizability is also achieved with the help of a special staining method. It is necessary and purely for practical purposes, protecting against mechanical and thermal effects. Today, many drivers prefer to buy Yamato wheels for both aesthetic appearance and purely practical value.

Benefits of brand products

The combination of forging and casting affects better side on maneuverability, the mass also decreases somewhat. Accordingly, users note that it is much easier to operate the machine. Manufacturers offer discs of different diameters, the most common are R16, R17.

They differ in the abundance of designs. In general, we can say that cast, forged Yamato wheels differ not only in parameters, but also in design, of which there are a great many options. Users also note the following:

• Even with prolonged use, the paint does not fade.
• The optimum ratio of price and quality.
• High resistance to vibrations, mechanical stress, excellent impact resistance.
• Provides optimum maneuverability.

Despite the numerous pluses and benefits, the cost of products can be attributed to the middle price segment. Discs from a well-known manufacturer are available to everyone, especially since they outperform cheap Chinese counterparts in terms of service life.

The company is actively developing, adopting, among other things, European production experience. It is not surprising that thanks to such a wise approach, including in terms of product costs, Yamato's popularity is only growing.

tribal union Yamato was the founder of the Japanese state. In ancient times, Japan itself was called Yamato.

Genus Yamato one of the first received from the emperor of Japan the right to produce weapons for the national army of the country. In combat operations and exhausting campaigns, the strength and lightness of weapons were valued. Swords (katana) produced by the family Yamato, fully met these requirements, as they were the strongest and lightest.

For many centuries, the heirs of the great ancestor made swords for the imperial army. As a reward for high quality and reliability, the emperor gave them the opportunity to sign swords with the name of the founder of the family. This is how the brand was born. "Yamato". Since then, the sign of the surname Yamato on swords became a sign of quality.

Auto disks Yamato Japan

All car rims Yamato Japan are made of high quality alloys that have passed multi-stage filtration, without unnecessary impurities that worsen the structure of the metal. The unique vacuum casting technology used in the production of wheel rims guarantees high precision specifications disks Yamato Japan during manufacture.

Coloring of car rims Yamato Japan carried out in several stages and has a wide range of colors: anthracite, white, black, black and silver mirror, dark silver mirror.

wheels Yamato Japan before reaching the buyer, they undergo the most severe quality control at each stage of the production process. It is not surprising that in practice they repeatedly confirm their impeccability in terms of reliability, quality and safety.

Using wheels Yamato Japan, You will notice their excellent maneuverability, silent, smooth running, the ability to quickly brake and start. These invaluable qualities contribute to saving money spent on fuel, on the replenishment and restoration of automotive systems, and as a result, extending the life of the car.

Disks Yamato Japan for those who value safety, quality and reliability.

Yamato Samurai rims

Wheel disks Yamato Samurai designed specifically for owners of overall vehicles with large diameter wheels. Disks Yamato Samurai are the elite wheels in their class and are aimed at customers who value individuality and sophistication.

Alloy wheel design Yamato Samurai developed by the studio japan city design, which took as a basis the principle of concise appearance, thereby conveying the spirit of Japanese masters to the discs. Clarity of lines, overall dimensions, aggressive appearance of disks Yamato Samurai absorbed the qualities of Japanese samurai warriors, which today inspire respect and are the standard of real warriors. All car rims Yamato Samurai are made of high quality alloys that have passed multi-level filtration, without impurities that worsen the quality of the metal.

wheels Yamato Samurai undergo the strictest control in accordance with the standards of Japanese production, which is confirmed by the sign VIA on the rim.

Alloy wheels Yamato Samurai for those who appreciate individuality, sophistication and reliability.

Premium rims Yamato Segun

Each premium disc Yamato Segun has a legend behind it. The Japanese, paying tribute to their history, gave the line premium discs Yamato is the name of Segun. Shoguns had real power in Japan, managing armies, leading regiments of warriors. The shoguns embodied individuality, they were armed with light but durable swords - katanas of the highest quality, which showed their high status and power.

Embodied in premium discs Yamato Segun all the qualities inherent in the shoguns, the Japanese proved that they remain true to their centuries-old traditions.

Premium discs Yamato Segun is the pinnacle of Japanese automotive rim engineering:

• State-of-the-art hybrid technology FLOW FORMING- High pressure die-cast center and forged rim.
• The unique combination of the smooth lines of the design of cast wheels with the lightness and strength of forged wheels.
• Extraordinary color solutions from a Japanese design agency JAPAN CITY DESIGN.
• Special design for Yamato Segun worldwide famous company AKZO NOBEL protective and decorative coatings guarantee resistance to aggressive mechanical and chemical influences.

Developed by the company JAPAN CITY DESIGN The design of the discs is an ultra-strong construction, dynamic appearance and ultra-low weight.

The lightness of premium wheels Yamato Segun achieved by compacting the metal using technology FLOW FORMING, which can significantly reduce the weight of the disc and increase strength. The disc weight is reduced by an average of 20% compared to competing alloy wheels (14 - 4.4 kg., 15 - 5 kg., 16 - 5.95 kg., 17 - 7 kg., 18 - 8 kg.), while increasing strength characteristics by 35-40%, which is comparable to the characteristics of forged wheels.

Premium discs Yamato Segun for people who will stand out from the crowd, go beyond stereotypes, appreciate the quality and reliability of each element.