iPhone is a versatile device that can be used as a phone, book, camera, game console, or router. It is practical in every sense of the word. However, sometimes the iPhone cannot cope with the user's task. Often such a task becomes setting up a gadget to distribute a wireless network. Therefore, in this topic we will analyze how to turn an iPhone into a Wi-Fi router.

Preparatory Steps Before Setting Up iPhone as a Tethering

Before setting up the iPhone 4 or 5 version to distribute Wi-Fi, you should read some recommendations and follow them.

• Charge your device to 100%. Distributing a wireless network will land your phone and it will be unpleasant if it turns off at the most inopportune moment.
• Take care of the right tariff plan. Ideally, it is better if you have unlimited, only in this case you can not worry about waste.
• Take care of the coverage. For high-quality communication, it is worth being in the LTE coverage area. The 3G zone is also suitable, but worse. The video in the latter case will not load well.
• Create a strong password to prevent other device users from connecting to the network and consuming traffic.

After completing all these steps, you can start setting up your iPhone 6.

Instructions for setting up an iPhone as a modem

To set up your iPhone to share a wireless network, follow these steps:

• We go to the menu and select "Settings".
• Next select " cellular". In the item "Cellular data" should be moved to the "On" position.

• We wait up to 5 minutes for the changes to take effect.
• Then we return to the menu. The "Modem mode" section will become active there. We tweak on it.
• A new section will open. In the "Wi-Fi Password" section, set a strong password. Next, drag the slider to the "Enabled" position for "Tethering Mode".

• All is ready. The iPhone will appear in the list of modems.

IMPORTANT! The device in this mode consumes twice as much energy, and therefore discharges faster. An iPhone can work in modem mode from 2 to 6 hours, depending on battery wear. After completing the work, it is worth performing all the same settings, just move the sliders in the "Modem mode" and "Cellular data" items to the "Disabled" position.

What should I do if the Modem mode item is not in the settings?

Initially, in iOS 7 and 8, "Tethering mode" is disabled. To enable it, do the following:

• Go to "Settings", "Cellular", "Cellular data network". Here you should select the settings of your mobile network operator.
• Further, for each operator, the data will be different.

For Megaphone

• API: internet
  Username: gdata
  Password: gdata

• APN: internet.mts.ru
  Username: mts
  Password: mts

For Beeline

• APN: internet.beeline.ru
  Username: beeline
  Password: beeline

• APN: internet.tele2.ru
  Username: leave blank
  Password: leave the field blank

After making changes, "Modem mode" will become available.

For more information on setting up an iPhone as a modem, see the video:

Smartphones running iOS can be used as universal Wi-Fi router. Consider the example of iOS 7/8.

To get started, go to the menu Settings –> cellular –> Cellular Data(move the slider to the right).

Next we will see Modem Mode. Move the slider to the field with the same name for inclusion this mode. iPhone will provide general access to the Internet.

Enter the password with which users will connect to you. Done, now the devices around you will be able to connect. Consider increased energy consumption when the modem is on. Turns off it is in reverse order.

How to share internet from android via wi-fi

If you have an android smartphone, then setting up the distribution will also be quite simple. In a couple of movements, we turn it into a 3G router. Let's see how it's done.

We go to the settings, we are looking for network connections. Don't forget turn on WiFi and mobile data to have something to distribute.

Next, go to the field Modem and access point(depending on the version of Android, it may be hidden in the Other networks or More... fields). Farther activate Wi-Fi access point mode, configure it by setting a password, SSID on the network and security level (you can leave it by default).

Almost any device can connect to such a router, since the old wireless communication standard is used - 802.11g, and the new 802.11n will support the old one.

Android as bluetooth modem

There is also an option that allows you to turn on the smartphone, as bluetooth modem. All other actions are similar to those done in the previous paragraph. The only thing, check whether visibility mode is enabled, whether your device is available to others.

android as usb modem

If you wish to use Mobile Internet on the computer via USB interface, then first connect to any USB port computer with a cord that usually comes with the kit.

Ability to transfer data wirelessly modern world not an innovation and not a luxury. Wi-Fi has become a daily companion of a person in almost all places, wherever he is: at home, in the office, in the gym or in the store. But sometimes, according to the classical law of meanness, there is an urgent need for a source handed out internet to connect personal computer in a place where there is no Wi-Fi. What to do? An excellent solution in such a situation would be to use the iPhone 6 smartphone. With simple settings, it can be turned into mobile modem. So, how to distribute internet using iPhone 6?

There are three ways to transfer data:

1. using a cable;
2. through the creation of a modem mode;
3. using the Bluetooth function.

If using a cable does not require special settings - you just need to install iTunes on your computer and connect it with your iPhone, then the other two methods can be difficult and require separate consideration.

Let's make an iPhone 6 - a modem, a description of the settings

So, in order to turn the iPhone 6 into a modem that easily distributes wireless Internet around you, you need to:

1. In the phone menu, find the “Settings” section and click on the “Cellular” item. In the window that appears, we connect support for 3G or 4G networks. This will maximize the data transfer rate.
2. In the same "Settings" section, look for the item "Modem mode" and activate its operation. From now on, the iPhone 6 becomes a hotspot as a modem, providing distribution wireless internet around you.

Click "Settings"

In the window that appears, we connect support for 3G or 4G networks

Settings in the absence of the item "Modem mode"

If, for some unknown reason, the “Tethering mode” item is missing on the iPhone in the “Settings” menu, then you should not be upset about this. There is another way that solves the issue: How to enable distribution internet on an apple smartphone?

1. In the "Settings" menu, find the "Cellular" item and click on it.

All the basic information about cellular communication is reflected here. on theiPhone 6 and its settings. All this data can also be found on the official website of the mobile operator that is used in the phone.

1. In the dialog box that opens, we find three sub-items: APN, "Username" and "Password".

The values ​​contained in these subclauses must be memorized or written down.

1. We find below in the window that opens the sub-item "Modem mode".

We copy into it the data from the previous paragraph that we remembered or wrote down.

1. Exit to the general menu "Settings".

Here, after changes have been made to the “Cellular connection” item, the item “Modem mode” we need will appear.

If you enter the item that appears, you can see that the activation slider will be in the disabled position by default. Under it there will be a window with instructions explaining how to distributeWi— fi and the steps that need to be taken to achieve this.

How to set the security password

From outside connections you can use a password. In order to install it you need:

1. In the "Modem Mode" item, find the "Wi-Fi Password" sub-item and click on it.
2. In the window that appears, using the pop-up keyboard, type a code word or number consisting of at least eight characters.

Now in order to use iPhone modem 6 on a computer, it will be necessary not only to find the network, but also to enter a secret word or number.

iPhone settings for data transfer via Bluetooth

Of course, this procedure is rarely used, but in some cases it can come in handy. So, to connect to the phone's modem via bluetooth a special module and drivers must be installed on the computer. Next, turn on the modem mode on the phone and perform the following steps:

1. On the computer, in the "Devices" tab of the control panel, we find the item "Bluetooth".
2. In the list of device names that appear, working within the radius of the module, we find the name of the iPhone 6 and press the communication button.
3. We confirm the request to create a connection on the smartphone screen.
4. Enter the password on the computer.

All. Internet access on the PC will be provided via Bluetooth.

Conclusion

Thus, with the help of light and simple manipulations, you can sixth Turn iPhone into a mobile modem and solve the problem: how to distribute Wi-Fi from iPhone 6. The possibility of accessing the worldwide network through a mobile Wi-Fi connection will speak about the correct implementation of all the necessary settings.

It is worth noting that working as an Internet access point most intensively discharges the iPhone battery. Also, the battery charge will be affected by the number of connected devices. The more of them, the more it will be discharged.

Hello everyone, dear users of mobile Apple gadgets. Today I will tell you how you can distribute Wi-Fi to other devices from your iPhone or iPad (in principle, there is no difference between the settings in an iPhone and an iPad). WiFi sharing to other devices in iOS is called a beautiful phrase of words - tethering mode.

In order to activate this mode, the modem mode is not active by default, you need to use the settings. Also, not all devices can activate this mode. Supported devices (I want to note that your iPhone or iPad device must support 3G network):

1. iPhone from 4 models, namely: 4, 4s, 5, 5s, 6, 6 plus, 6s, etc. For example, I used this mode on the iPhone 5s, everything worked perfectly;
2. iPad 3 Wi-Fi Cellular models and, of course, later models;
3. iPad Mini WiFi models.

I repeat that your device, in order to activate the modem mode, must support a 3G network.

So, follow the steps below and you will successfully activate the tethering mode and be able to distribute Wi-Fi from your iPad or iPhone device:

Important: for security reasons, in order to limit access to your network by various intruders, I recommend that you come up with the most complex password, consisting of both numbers and letters in lower and upper case.

Important

I want to note that in order for this mode to work correctly, your mobile operator must support the “Modem Mode” function. Here are the settings for the most popular mobile operators:

1. MTS. To configure the mode with this cellular operator, you need to specify APN - internet.mts.ru login and connection password - mts;
2. Beeline. To configure the mode with this cellular operator, you need to specify APN - internet.beeline.ru login and connection password - beeline;
3. Megaphone. To configure the mode with this cellular operator, you need to specify APN - internet login and connection password - gdata.

In most cases - tethering mode - will work immediately after activating it on your mobile Apple device iPhone and iPad, no additional settings are required, standard settings are enough.

That's all for me, I hope you were able to easily distribute the Internet via Wi-Fi from your iPhone and iPad mobile device. I would be very grateful if you share the article in in social networks so that your friends and acquaintances can also use it. Do you have any questions? You can ask them using the comment form below. See you in the next useful material.

Owners of Apple technology do not always know what their expensive gadgets are capable of. Many people buy an iPhone or iPad to surf the vast expanses of the Internet, take photos and videos, watch movies.

Modern devices have the ability not only to receive a network signal, but also to distribute it

Basically, everyone uses the Internet on iOS through home Wi-Fi or. But in some cases, you may urgently need the Internet on a laptop, and, as luck would have it, it was turned off. Either technical reasons, or some other, but the deadlines are burning, and the provider does not help in any way. And then it turns out that you can distribute the Internet via Wi-Fi from your iPhone or iPad. And if the device works on a 4G network, the speed will be almost the same as with a home connection. Therefore, let's look at how to distribute the Internet via Wi-Fi from your iOS device.

Enabling Internet distribution

If you think that you will have to dance with a tambourine around the fire and read spells over your iPad or iPhone, then this is absolutely not the case. Just a few taps on the iPad screen and you're done. Such an impromptu router will be able to distribute the Internet to various devices with a high level of reliability. To start a distribution:

1. Go to the iPad menu, launch "Settings";
2. Find the "Cellular" tab;
3. It must include "Cellular Data";
4. Return to the main menu or iPhone, go to "Tethering Mode" and slide the function enable slider. At the first start, change the password;
5. On the laptop, find your network in the active list, enter the password and connect.

Everything! You are online! About active work you will recognize by the icon in the top line of the iPad screen next to the name of the operator. Do not forget to enter the password, because otherwise the network will remain open, and everyone will connect to it, eating up your money and traffic. Do you need it?

Also, be realistic about your expectations. By the indicator in the information line of iOS, you can determine the type of network:

• E - EDGE - the most slow speed. The maximum that can be done is to open pages with not very heavy content;
• 3G - a little higher, you can call on Skype or Viber, open most sites;
• 4G / LTE - the maximum possible, you can use it without restrictions.

Do not forget that the tariff may not imply unlimited traffic. This way you can avoid unexpected expenses.

Problems and Possible Solutions

The laptop does not connect to the network - you should turn off the iPad / iPhone modem mode, then turn it on again. You may have to or PC.

The menu item "Modem mode" is missing - you may have to change the operator. Some companies do not allow hotspot mode on their SIM cards. The iPad hardware has nothing to do with it.