Lifting machine operator ranks. Retraining and advanced training of aerial platform and hydraulic aerial lift operator
VOCATIONAL JOB TRAINING
"TOCKER OPERATOR AND AUTO HYDRAULIC LIFT »
Get a blue-collar job right now
- and receive a qualification document!
About the vocational training program
Profession code
: 13507
Qualification categories:
4-7
The purpose of training:
to provide students with knowledge, skills and abilities in developing competence to perform work activities as an aerial platform and hydraulic aerial lift operator.
Training period:
2 weeks.
Scope of the program:
80 hours, of which:
- theoretical training - 70 hours;
- on-the-job training - 10 hours.
Language of instruction:
Russian
Age: from 17 years old
Restrictions on educational level:
none
Place of study:
you can complete the training and receive an official qualification document regardless of where you live.
Form of study:
correspondence (full-time/correspondence) with the use of e-learning and distance learning technologies.
Author of the program: | |
Program partner: |
+ | = | |||
The program consists Complete courses (3) in the order suggested. |
Qualifying work Complete practical qualifying work. |
Certificate of worker's profession Receive a qualification document and start working. |
||
Go to the e-learning portal |
Training period | Vocational training programs | Volume (hour.) |
Form of study | |
correspondence * | part-time ** | |||
EDUCATIONAL PROGRAMS PROFESSIONAL TRAINING | ||||
2 weeks | Aerial platform and hydraulic lift operator (who previously did not have a working profession)*** |
80 | 5000 | 7000 |
EDUCATIONAL PROGRAMS RETRAINING | ||||
2 weeks | Aerial platform and hydraulic lift operator (having any working profession)*** |
80 | 4500 | 6500 |
EDUCATIONAL ADVANCED PROGRAMS |
||||
2 weeks | Aerial platform and hydraulic lift operator (increase in qualification level to 5, 6, 7) |
80 | ||
PROGRAMS ADDITIONAL EDUCATION | ||||
aerial-profi | Aerial platform operator with telescopic arm | 40 | ||
boom-profi | Operator of aerial platform with articulated-elbow boom | 40 |
***PLEASE NOTE! If you do not have any profession as a worker, do not have a document on vocational education or vocational training, then you need to undergo training in a vocational program preparation. If you have previously acquired a profession or received vocational education, then you need to undergo training according to a professional program retraining. Affects the cost of training!
*
Extramural studies- for citizens of any subject of the Russian Federation (training using e-learning and distance learning technologies).
**
Part-time and part-time education- for citizens living in the territory of Yaroslavl and the Yaroslavl region.
Vocational training program
- training of persons who have not previously had a working profession.
Retraining program- training for people who already have a working profession (tractor driver, loader driver, bulldozer driver, all-terrain vehicle driver, motor grader driver, etc.).
Advanced training program- training of persons who already have a worker’s profession in order to consistently improve professional knowledge, skills and abilities in their existing profession.
QUALIFICATION RANKS
Qualification characteristics in accordance with: Unified Tariff and Qualification Directory of Work and Professions of Workers (UTKS). Issue No. 3 Approved by Order of the Ministry of Health and Social Development of the Russian Federation dated 04/06/2007 N 243 (as amended by: Orders of the Ministry of Health and Social Development of the Russian Federation dated November 28, 2008 N 679, dated 04/30/2009 N 233)
4th category
up to 15 m
;
5th categoryover 15 to 25 m
;
6th category- aerial platforms and auto-hydraulic lifts with lifting heights over 25 to 35 m
;
7th category- aerial platforms and auto-hydraulic lifts with lifting heights over 35 m
.
Characteristics of the work.
Control of machines and mechanisms used in construction, installation and repair work. Maintenance and preventive repair of machines and mechanisms.
Must know: design of machines (mechanisms), rules and instructions for their operation, maintenance and preventive repairs; traffic rules when working with motorized vehicles; methods of performing work using appropriate machines; technical requirements for the quality of work performed, materials and elements of structures; consumption standards for fuels, lubricants and electricity.
DOCUMENT OF QUALIFICATIONS
After completing the educational program, the student receives a qualification document - a certificate of worker's profession.
The certificate of the worker's profession confirms the assignment of a rank based on the results of vocational training. The qualification specified in the qualification document gives its holder the right to engage in certain professional activities or perform specific labor functions
(clause 11, article 60 of the Law on Education in the Russian Federation of December 29, 2012 No. 273-FZ)
MINISTRY
|
Unified tariff and qualification reference book.(Fragments. The full version is located at the bottom of the page - for downloading). Driver Characteristics of the work. Control of machines and mechanisms used in construction, installation and repair work. Maintenance and preventive repair of machines and mechanisms specified in §§ 100 - 105. Must know: the design of machines (mechanisms), rules and instructions for their operation, maintenance and preventive repairs; traffic rules when working with motorized vehicles; methods of performing work using appropriate machines; technical requirements for the quality of work performed, materials and elements of structures; consumption standards for fuels and lubricants and electricity; plumbing to the extent provided for a construction mechanic, but one category lower than that of a machinist. § 100. Driver 3rd category Mobile concrete mixers with batch volume up to 425 liters. Construction cargo lifts (mast, rack, shaft). Mortar pumps. Mobile mortar mixers with batch volume up to 325 l. Electric winches. Electric welding mobile units with an internal combustion engine with a power of up to 37 kW (50 hp). § 101. Driver 4th category Aerial platforms and hydraulic lifts with a lifting height of up to 15 m. Mobile power plants with an engine power of up to 37 kW (50 hp). § 102. Driver 5th category Truck-mounted concrete pumps with a capacity of up to 40 m3/h. Aerial platforms and auto-hydraulic lifts with lifting heights of over 15 to 25 m. Automotive compressors with a capacity of over 3 m3/min. Automotive drills. Bar installations on tractors with an engine power of over 43 kW (60 hp) to 73 kW (100 hp). Concrete pumping units with a capacity of over 20 m3/h. Mobile concrete mixers with a batch volume of over 1200 to 2400 liters. Vacuum installations. Self-propelled hydroseeders. Drainage machines. Compressors for supplying air to divers. Mobile compressors with a capacity of over 10 to 50 m3/min. Automotive cranes with a lifting capacity of over 6.3 to 10 tons. Machines for insulating gas and oil product pipelines with a diameter of up to 800 mm (in route conditions). Mechanized tensioning devices for the production of stress-reinforced structures. Mechanized equipment for lifting movable (sliding) formwork. Mobile pipe bending units for bending pipes with a diameter of over 1200 mm. Pipe cleaning machines with engines up to 73 kW (100 hp). Pipelayers with engines up to 73 kW (100 hp). Compacting and leveling-compacting machines. Mobile automated continuous installations for preparing concrete mixtures with a capacity of up to 60 m3/h. Electric welding mobile units with an internal combustion engine with a power of over 73 kW (100 hp) to 110 kW (150 hp). Mobile power plants with an engine power of over 37 kW (50 hp) to 110 kW (150 hp). § 103. Driver 6th category Truck-mounted concrete pumps with a capacity of over 40 to 60 m3/h. Aerial platforms and auto-hydraulic lifts with lifting heights of over 25 to 35 m. Bar installations on tractors with an engine power of over 73 kW (100 hp). Self-propelled earthmoving and milling machines. Mobile compressors with a capacity of over 50 to 70 m3/min. Mobile resistance welding installations for welding main gas and oil product pipelines. Automobile cranes with a lifting capacity of over 10 to 20 tons. Machines for insulating gas and oil product pipelines with a diameter of over 800 mm to 1000 mm (in route conditions). Pipelayers with an engine power of over 73 kW (100 hp) to 100 kW (140 hp). Mobile automatic installations of continuous operation for the preparation of concrete mixtures with a capacity of over 60 to 80 m3/h. Installations for punching and horizontal drilling of soil for laying pipelines with a drilling diameter of up to 500 mm. Electric welding mobile units with internal combustion engines with a power of over 110 kW (150 hp). Mobile power plants with engines with a capacity of over 110 kW (150 hp) to 175 kW (240 hp). § 104. Driver 7th category Truck-mounted concrete pumps with a capacity of over 60 to 180 m3/h. Aerial platforms and auto-hydraulic lifts with a lifting height of over 35 m. Mobile compressors with a capacity of over 70 m3/min. Automotive cranes with a lifting capacity of over 20 to 40 tons. Machines for insulating gas and oil product pipelines with a diameter of over 1000 to 1200 mm (in route conditions). Levelers (type UDS-100, UDS-114) on a vehicle chassis for digging trenches when constructing structures using “wall in soil” methods with a depth of 20 to 40 m. Installations for punching and horizontal drilling of soil when laying pipelines with a drilling diameter of over 500 mm to 1000 mm. Pipelayers with engine power over 100 kW (140 hp) to 145 kW (200 hp). Mobile power plants with an engine capacity of over 175 kW (240 hp). Secondary vocational education required. § 105. Driver 8th category Truck-mounted concrete pumps with a capacity of over 180 m3/h. Automotive cranes with a lifting capacity of over 40 to 60 tons. Machines for insulating gas and oil product pipelines with a diameter of over 1200 mm. Planers (type UDS-110, UDS-114) on a vehicle chassis for digging trenches when constructing structures using the “wall in soil” method with a depth of over 40 m. Pipelayers with engine power over 145 kW (200 hp) to 220 kW (300 hp). Mobile automated continuous installations for preparing concrete mixtures with a capacity of over 120 m3/h. Installations for punching and horizontal drilling of soil when laying pipelines with a drilling diameter of over 1000 mm. Mobile power plants included in the Sever machine complex. Secondary vocational education required. Note. Automotive crane operators operating cranes with tower-boom equipment (ABKS type) are charged one grade higher for the same crane lifting capacity. Bulldozer driver Characteristics of the work. Carrying out work with bulldozers with engines whose power is specified in §§ 106 - 110. Development, movement of soil and leveling of areas when constructing excavations, embankments, reserves, cavaliers and banquets during the construction of roads and railways, irrigation and shipping canals, dams, protective earthen dams, pits for buildings and structures, supports for power lines and contact networks and other similar structures. Carrying out emergency repair work on railway transport. Carrying out work underwater with a bulldozer. Must know: the structure, operating principle and technical characteristics of tractors and attachments; methods of installation and dismantling of attachments; causes of malfunctions and ways to eliminate them; rules for the development and movement of soils of various categories at different development depths; rules for layer-by-layer filling of embankments - rules for developing excavations, filling embankments and planning areas according to given profiles and elevations. § 106. Bulldozer driver
4th category
Bulldozers with engines up to 43 kW (60 hp). § 107. Bulldozer driver 5th category Bulldozers with an engine power of over 43 kW (60 hp) to 73 kW (100 hp). § 108. Bulldozer driver 6th category Bulldozers with an engine power of over 73 kW (100 hp) to 150 kW (200 hp). Secondary vocational education required. § 109. Bulldozer driver 7th category Bulldozers with an engine power of over 150 kW (200 hp) to 280 kW (380 hp). Secondary vocational education required. § 110. Bulldozer driver 8th category Bulldozers with an engine power of over 280 kW (380 hp). Secondary vocational education required. Excavator driver Characteristics of the work. Carrying out work with single-bucket excavators with a bucket and rotary excavators, the capacity and productivity of which are specified in §§ 115 - 119. Development of soils during the construction of excavations, embankments, reserves, cavaliers and banquets during the construction of highways, irrigation and shipping canals, dams, protective earthen dams . Development of pits for buildings and structures, during the construction of supports for power lines and contact networks. Digging trenches for underground communications, drainage ditches, upland and off-bank ditches and other similar structures. Must know: the structure, operating principle and technical characteristics of excavators; operating principle of mechanical, hydraulic and electrical equipment; rules for installing and dismantling excavator attachments; causes of malfunctions and ways to eliminate them; rules for developing soils of various categories at different depths of the face; rules for soil development in compliance with specified profiles and elevations. § 115. Excavator operator 4th category Single-bucket excavators with a bucket capacity of up to 0.15 m3. § 116. Excavator operator 5th category Single-bucket excavators with a bucket capacity of over 0.15 m3 to 0.4 m3. § 117. Excavator operator 6th category Single-bucket excavators with a bucket capacity of over 0.4 m to 1.25 m3. § 118. Excavator operator 7th category Single-bucket excavators with a bucket capacity of over 1.25 m3 to 4 m3. §119. Excavator driver 8th category Single-bucket excavators with a bucket capacity of over 4 m3 to 9 m3. Operator of machines for constructing bases and surfaces of highways and airfields Control of machines of various types and purposes specified in §§ 120 - 124, used in the construction and repair of the superstructure of highways and the construction of airfields. Maintenance of the machine, checking the serviceability of its systems and components. Identification and elimination of malfunctions in the operation of the machine. Participation in scheduled preventive maintenance. Refilling with fuels and lubricants. Must know: the purpose and design of the machines being serviced, the rules and instructions for their operation; methods of performing work and technical requirements for their quality; consumption standards for fuels and lubricants; types and properties of oils and fuels, their technological characteristics, rules for safe storage; Traffic Laws. § 120. Driver 4th category Trailed graders with a blade up to 3000 mm long (without extension). § 121. Driver 5th category Auto concrete breakers. Finishers. § 122. Driver 6th category Motor graders with engine power over 59 kW (80 hp) to 100 kW (135 hp).
protective coating layers. Road milling cutters with an engine power of up to 120 kW (160 hp). Secondary vocational education required. § 123. Driver 7th category Motor graders with engine power over 100 kW (135 hp) to 150 kW (200 hp).
§ 124. Driver 8th category Motor graders with engine power over 150 kW (200 hp) to 180 kW (240 hp).
Profession Aerial platform and hydraulic lift operator In Ekaterinburg. Where can you learn to become an aerial platform and hydraulic aerial lift operator in Yekaterinburg. In Yekaterinburg, the profession of aerial platform and hydraulic lift operator can be obtained in colleges and technical schools in Yekaterinburg, as well as in educational centers and vocational training centers. Courses for aerial platform and hydraulic lift operator Ekaterinburg, training for aerial platform operator in Yekaterinburg Professional standard Operator of aerial platform and aerial hydraulic lift reg number under development Description of the profession Operator of aerial platform and hydraulic lift 13507 Aerial platform and hydraulic lift operator Characteristics of the work. Control of machines and mechanisms used in construction, installation and repair work. Maintenance and preventive repair of machines and mechanisms specified in § § 100 - 105. Must know: the design of machines (mechanisms), rules and instructions for their operation, maintenance and preventive repairs; traffic rules when working with motorized vehicles; methods of performing work using appropriate machines; technical requirements for the quality of work performed, materials and elements of structures; consumption standards for fuels and lubricants and electricity; plumbing to the extent provided for a construction mechanic, but one category lower than that of a machinist. § 100. Driver 3rd category § 101. Driver 4th category § 102. Driver 5th category Mobile power plants with an engine power of over 37 kW (50 hp) to 110 kW (150 hp). § 103. Driver 6th category § 104. Driver 7th category § 105. Driver 8th category Contents of the work: Retraining and advanced training of aerial platform and hydraulic aerial lift operators with the assignment of a qualification category. Group classes or individual consultations. Training is carried out both on the basis of an educational institution and on the basis of a customer organization in any region of Belarus. Workers who have a rank in this profession (3-7 ranks) can undergo advanced training. Upon completion of training, state-issued documents are issued: a certificate of assignment of a qualification category in the profession. ETKS MACHINIST (GENERAL CONSTRUCTION MACHINERY) Characteristics of the work. Control of machines and mechanisms of various types and purposes during construction, installation and repair work. Refueling vehicles with fuels and lubricants. Regulation of the working mechanisms of machines for a given operating mode. Maintenance of machines and mechanisms. Identification and elimination of malfunctions in their operation. Preventative repairs and participation in other types of repairs of serviced equipment. 3rd category 1. Means of small-scale mechanization: mobile concrete mixers with a batch volume of up to 425 liters, mast, rack and shaft lifts, mortar pumps, mobile mortar mixers with a batch volume of up to 325 liters, electric winches. 4th category 1. Aerial platforms and hydraulic lifts with a lifting height of up to 15 m. 5th category 1. Truck-mounted concrete pumps with a capacity of up to 40 cubic meters per hour. 6th category 1. Truck-mounted concrete pumps with a capacity of over 40 to 60 cubic meters per hour. 7th category 1. Truck-mounted concrete pumps with a capacity of over 60 to 180 cubic meters per hour. 8th category 1. Truck-mounted concrete pumps with a capacity of over 180 cubic meters per hour. The issue was approved by Decree of the Ministry of Labor and Social Development of the Russian Federation dated November 14, 2000 N 81 Lift operator§ 11. Lift operatorCharacteristics of work. Maintenance of the lift (unit) during the work on major, current repairs and sampling (testing) of wells. Preparing the lift (unit) for work. Participation in preparatory and final work, installation and dismantling of the lift, in the equipment of the traveling system, in the installation and maintenance of auxiliary mechanisms used during the overhaul of wells (pumping unit, machine and hydraulic keys, preventer hydraulic lines and other equipment from the installation’s hydraulic system). Winch control for all hoisting operations. Control of a power electric generator installed on a lift (unit). Participation in work on capital and underground repairs of wells, in work on testing and equipment of wellheads. Monitoring the proper operation of the recorder and lift (unit) mechanisms. Keeping a log of the operation of the lift (unit). Driving a car or tractor, refueling them. Carrying out routine repairs of lift (unit), car, tractor mechanisms. Maintenance of mobile power plants with a capacity of up to 100 kW. Must know: technological process of extraction of oil, gas and other minerals; well design; technological process and types of well testing work; technical characteristics and operating rules of the tractor-lift, mobile unit, used mechanisms, devices, traveling systems; technological process and types of major and current repairs, well testing methods; brands and grades of fuels and lubricants; basics of electrical engineering and plumbing in the scope of work performed; methods for repairing the engine, transmission and chassis of lifting winches. For underground and major repairs on wells of category I complexity and sampling (testing) of wells up to 1500 m deep inclusive - 5th category; for underground and major repairs on wells of II category of complexity and sampling (testing) of wells with a depth of over 1500 m, directional wells regardless of their depth and wells with complicated geological conditions - 6th category; for underground and major repairs carried out from lifting installations with a lifting capacity of 80 tons and above - 7th category. Secondary vocational education required. |