Crystal SLS Freetransparent soap base that does not contain sodium lauryl sulfate.

Manufacturer: England

Main characteristics:

• the base is transparent;
• has no smell;
• does not crumble and is easy to cut
• has high plasticity
• simple and convenient to use
• accepts any ingredients well
• finished soap from a transparent base takes bright, saturated.
• does not cause an irritant reaction in the skin;
• does not dry out the skin.
• does not contain sodium lauryl sulfate, which is responsible for foaming, therefore it does not have abundant foam.
• has good cleansing properties despite the absence of SIS.

The expiration dates of the products presented on our website start from three months.
.
If you received a product with a shorter expiration date, write to us at email We will replace it or refund your money.

Composition of CrystalSLS Free:

Sample Soap Recipe for Beginners

Soap base Crystal (Crystal) SLS Free - 100 gr

Dye to your taste - 3-4 drops

Fragrance or perfume - 10-20 drops

Alcohol (ethyl or formic)

Spray bottle for alcohol

Soap mold

Food or shrink film for packaging

Cooking method:

1. Cut Crystal SLS Free soap base into cubes about one centimeter on a side. Don't worry if the cubes get a little bigger or a little smaller - the main thing is not to make them completely huge or tiny.
2. Put the glass with the base in a water bath or microwave. In a water bath, make sure that the water level in the pan approximately coincides with the water level in the glass with the base. Water should be hot but not boiling. If you make soap in the microwave, then set the average power and time to one and a half minutes. Check back in 30 seconds. If not yet melted, continue to heat, peeking every 5-10 seconds. Very small pieces can then be homemade, having already pulled the glass out of the microwave. In both cases, it is important that the base does not boil.
3. Add dye - first 1-2 drops, then, if necessary, another 1-2. Stir. If this is your first soap, then we advise you to limit yourself to one color in order to simply understand the process, and then you can already experiment with multi-layer fills.
4. Add scent. Stir. The soap should smell a little more intense than you want - over time, the smell will fade a little.
5. Pour the base into the mold, if necessary, sprinkle the bubbles that appear with alcohol.
6. Leave to cool for an hour. Try not to move the shape to keep the surface smooth.
7. Carefully remove the finished soap. If you used a plastic mold, then before pulling out the soap, you can put it in the refrigerator for 10-15 minutes.
8. Wrap the soap in cling film or shrink wrap.

On the Russian market, a few years ago, a transparent soap base Activ SLS Free appeared. The products aroused keen interest from those who are fond of home soap making or even have their own soap business.

The reasons for such an active demand are simple: Sodium lauryl sulfate does not contain a hard surfactant. It is the most popular and cheapest surfactant on the market for cosmetic products. It has a very negative effect on the skin. With regular use of products containing sodium lauryl sulfate, allergic reactions, skin peeling, dermatitis, skin rash are possible. Activ SLS Free soap base does not contain this surfactant. But soap should lather and lather. What does this product replace in the composition of the soap base Activ SLS Free?

In production, we use gentle surfactants made from the fruits of coconut trees. These surfactants are still used in cosmetics for children and allergy sufferers. This is cocamidopropyl betaine and lauryl glycoside. In addition, the soap base Activ SLS free is made on the basis of high-purity vegetable glycerin. All this makes it possible to use this base even for the manufacture of intimate hygiene products, for sensitive and allergenic skin.

Soap base Activ SLS free lathers well and perfectly washes away dirt from the skin. With soap base Activ SLS free very easy to work. It is plastic and very easy to cut with a regular knife. Does not crumble when crushed. In addition, Activ SLS free perfectly accepts nourishing oils, retains the smell of cosmetic fragrances in the finished product for a long time, and has perfect transparency. The special formulation of the soap base allows it to be used in several remelts. This is very convenient if you are working with small batches of soap base.

Active SlS-Free- transparent soap base without sodium lauryl sulfate.

Compound:

Water, glycerin, sodium stearate, propylene glycol, sodium laureth, laureth sulfate.

High transparency, abundant foaming, good absorption of oils and fragrances, the presence of very delicate surfactants.

Delivery options:

1. 1. Packing 0.5 kg (box 12 pcs.)
   2. Packing 1 kg (box 12 pcs.)
   3. Packing 10 kg. (handy box)

The price is for 1 kg

Among the world manufacturers of soap base, England is considered a recognized leader. Its quality has been tested by hundreds of thousands of soap makers and it is unlikely that there will be at least one dissatisfied among them.

English soap base benefits

• Produced from vegetable raw materials
• Huge range of both solid and liquid soap bases,
• Easy to choose the basis for any kind of soap
• The most famous and popular manufacturer in the world
• The quality is confirmed by the EcoCert certificate and a number of other foreign certificates
• The whole white base is evenly colored, titanium dioxide does not precipitate
• The basis of packing 1 kg is sold in plastic boxes in which it is convenient to store it.
• Accepts perfume compositions and additives well

There are many types of English soap base. We have prepared a table to help you make the right choice:

Features of different types of English stems:

Details of the features of each basis can be found in this table.

The detailed composition of the soap base (England) is indicated in the product cards.

How to buy a soap base (England)

In our store you can buy a soap base made in England, both in bulk at a significant discount, and in retail (from 0.5 kg).

In addition to the soap base, we advise you to immediately look in the catalog for molds, smells and colors for your future soap. Add the items you like to your shopping cart and checkout. If you still doubt which basis is better to choose - ask us a question on the website or by phone - and we will definitely help you.

Appearance:

Transparent solid product, similar to a block of ice. Easily cut with a knife, odorless.

Stephenson Group manufactures soap base in two packaging options: 1kg transparent plastic containers and patented carton boxes with foil inside with a convenient folding-folding system for 11.5 kg.

Purpose:

The soap base was invented so that anyone could make soap quickly and conveniently - just melt it, add a dye, flavor and additives if desired, and pour it into the mold. The transparent soap base SLS Free is designed to make the soap soft on the skin and very beautiful. Thanks to Crystal transparency, there is an unimaginable space for decorating soaps.

Compound:

Water 25% - 50%

Glycerin 10% - 25%

Sodium Stearate 10% - 25%

Propylene Glycol 10% - 25%

Sorbitol 5% - 10%

Sodium laureth 5% - 10%

Sodium laureth sulfate 5% - 10%

Disodium laureth sulfosuccinate 1% - 5%

Sodium chloride 0.5% - 1%

Stearic acid 0.5% - 1%

Lauric acid 0.1% - 0.5%

Pentasodium pentenate<0,1%

Tetrasodium etidronate<0,1%

Characteristics:

melting point - about 60°С

boiling point - about 100°С

Storage:

3 years from date of manufacture at room temperature.

The main condition is that the base must be hermetically sealed, since it consists of 25% water and if there is access to air, then the water from the base will evaporate.

From moist air, the soap base tends to attract moisture droplets that will collect on the surface of the finished soap or soap base (this is due to glycerin, which is known to be hygroscopic). To prevent this from happening, the base must be packed in polyethylene, which will protect and from dust. Ready soap can be packed in polyethylene bags or shrink film.

Advantages:

• Maximum transparency
• Light shade without yellowness
• Stable quality from a world famous manufacturer
• Forms a thick, soft, stable foam
• Predictably well behaved at work
• Does not contain sodium lauryl sulfate, gently cleanses the skin
• Neutral odor does not distort the odors of the fragrances used
• Due to the high content of glycerin, it creates a pleasant feeling on the skin and reduces the irritating effect of washing components.

Peculiarities:

Despite the plant origin and the absence of sodium lauryl sulfate, the base also contains inorganic components. If you want to make the most natural or all natural soap, you can use Crystal NCO, Crystal Shea, Crystal Re-Batch soap bases or make soap without using soap bases from oils and lye (“soap from scratch”). At the same time, SLS Free will always be the leader in transparency, and completely natural soap will not be transparent.

Test comparison for transparent soap bases produced in Russia "Brilliant" and "DA Soap Crystal" and England "SLS Free".

The basis of "Brilliant" and "SLS Free" are removed from the form well, without sticking, without leaving marks on the form after excavation. The base "DA Soap Crystal" is removed from the mold with little effort, a trace of the base remains at the bottom.

The base "Brilliant" and "DA Soap Crystal" have a slight yellowish tint.

Instructions:

1. Cut into small cubes.

2. Melt in a water bath or microwave.

3. Add dyes, flavors, other additives as desired.

4. Pour into the mold.

For colored soap: If you don't want your soap to shed later, choose non-migratory pigments.

For multi-layer soap, the temperature of the melted base should be between 70° and 80°C.- if less, then the layers will fall apart, and if more, then the second layer will melt the previous one. Soap will never boil in a water bath, but it can be difficult to heat it up to 70 ° - for this cover the soap container.

Also, for better adhesion of layers and from bubbles, sprinkle with alcohol. Alcohol is prohibited in retail sales, but we can offer a "bubble stop" product. It should be borne in mind that "bubble stop" helps only from bubbles, it does not affect the adhesion of the layers - but the main thing for the coupling is the temperature, here you can do without alcohol.

Classic oil, when added, reduces foaming and makes the base cloudy - for perfect transparency and good foam, choose water-soluble grape seed oil or do without oil.

Despite the simplicity of the "melt and pour" process, there are many techniques for making soap - mainly they relate to visual performance. Here are some of them:

soapstones

Soap with water-soluble paper (top layer)

Soap with infusions

Soap cakes (berries)

How to choose a soap base? Which manufacturer is better? In this article, we will look at the most popular ready-made soap bases, which are available in almost every specialty store. We will also talk about the composition and purpose.

The bases of the English brand Crystal are the most popular among soap makers. They foam well, are odorless, do not dry the skin, it is easy to cut, melt and harden quickly.

English soap base

White (Crystal WSLS Free)

Made from vegetable fats. It has a white matte color, due to the mineral dye - titanium dioxide. Due to the high content of glycerin, it nourishes and moisturizes the skin well. Great for beginners as it is easy to handle. When dyeing, it does not give bright shades, the colors will be pastel, muted, no matter how much dye you add. Lauryl sulfate is completely absent in this base, so the soap will not have abundant foam. At the heart of Crystal WST there is this element and there will be more foam.
Melting point - 70-75 ° C, pour point - 45-50 ° C, pH level 7.5 - 8.5.

<0,1%), тетранатрия этидронат (<0,1%), диоксид титана.

Transparent (Crystal SLS Free)

It has no color, therefore, when stained, it gives bright saturated shades. It is important to remember that the base will become cloudy from the addition of base oils. Takes oils and other supplements well. Plastic, easy to cut. Has no smell. No lauryl sulfate. Gently and gently cleanses the skin without drying it.

Ingredients: water (25%-50%), glycerin (10%-25%), sodium stearate (10%-25%), sorbitol (5%-10%), propylene glycol (10%-25%), laureth sodium (5% - 10%), sodium laureth sulfate (5% - 10%), disodium laureth sulfosuccinate (1% - 5%), sodium chloride (0.5% - 1%), stearic acid (0.5% - 1%), lauric acid (0.1% - 0.5%), pentasodium penthenate (<0,1%), тетранатрия этидронат (<0,1%).

White with Shea butter (Crystal Shea)

White. Created on the basis of vegetable fats and Shea butter is 18% of them. Does not contain monopropylene glycol and surfactants, high content of glycerin. pH 8.0-9.0. It is odorless, so it accepts fragrances and fragrances well.
Shea butter soothes, softens and nourishes, great for dry skin. It has antioxidant properties, so it is good for aging skin.

Ingredients: Glycerin, Water, Sodium Palmate, Sodium Palm Carnelate (Red Palm Oil), Butyrospermum Parkii (Shea Butter), Sodium Hydroxide, Palm Acid, Palm Oil Fatty Acid, Sodium Citrate, Titanium Dioxide, Pentasodium Pentenate, Tetrasodium Etidronate.
Crystal OV - transparent olive oil base

Based on olive oil - 20% of all oils used. It foams well, has a neutral smell, high glycerin content, slightly yellowish color. Thanks to the properties of olive, it takes good care of sensitive and dry skin, eliminates flaking, protects the skin and softens it.

Ingredients: water (25-50%), glycerin (10-25%), sodium stearate (10-25%), propylene glycol (10-25%), sorbitol (10-25%), sodium laureth sulfate (5 - 10 %), Sodium Laurate (5-10%), Sodium Olivate (5-10%), Sodium Lauryl Sulfate (1-5%), Sodium Chloride (0.5%-1.0%), Stearic Acid (0. 1%-0.5%), lauric acid (0.1%-0.5%), pentasodium pentenate (< 0,1%), тетранатрия этидронат (< 0,1%).

Soap base with goat milk (Crystal Goats Milk)

Matte white. Plant-based with goat's milk. A high percentage of glycerin, thanks to which the soap takes good care of the skin. There is no smell, so it easily accepts flavors and fragrances. pH 7.5 - 8.5. Goat milk helps to restore the skin, eliminates signs of aging, softens and moisturizes.

Ingredients: water (25% - 50%), glycerin (10% - 25%), sodium stearate (10% - 25%), propylene glycol (10% - 25%), sobitol (10% - 25%), sodium laurate (5%-10%), sodium laureth sulfate (5%-10%), goat milk (5%-10%), sodium lauryl sulfate (1%-5%), sodium chloride (0.5-1.0 %), stearic acid (0.5-1.0%), lauric acid (0.5-1.0%), pentasodium penthenate (< 0,1%), тетранатрия этидронат (< 0,1%), диоксид титана (0,1-0,5%).

Organic Soap Base Crystal NCO (ORG)

It has a light brown color, due to the oils included in the composition. Created on the basis of natural oils, without surfactants and PGMs.

Contains natural glycerin, which is formed during the saponification of fats. It is very similar to soap "from scratch", since the percentage of chemistry is almost zero. It is considered the highest quality, useful and safe basis. pH 8.0-9.0. However, it has a specific smell that can interrupt the flavoring.

This base is not bleached, so it is more environmentally friendly. Well suited for the preparation of intimate hygiene products, as well as face care products.

Ingredients: glycerin (25% - 50%), water (25% - 50%), sodium palmate (10% - 25%), sorbitol (5% - 10%), sodium cocoate (5% - 10%), decyl glycoside (1%-5%), sodium chloride (1%-5%), coconut acid (0.1% - 0.5%), pentasodium penthenate (< 0,1%), тетранатрия этидронат (< 0,1%).

Swirl Base (Crystal Suspending M&P)

Solid, translucent. Well suited for creating soap with streaks (swirls) and scrub particles, due to the viscous structure of the soap, they will not settle to the bottom, but will be evenly distributed throughout the soap. Neutral smell, good lather, and excellent skin care.
A possible problem is the formation of small bubbles during processing, because of this the soap will become cloudy.

Ingredients: Water, Propylene Glycol, Sodium Stearate, Glycerin, Sucrose, Sodium Laurate, Sodium Laureth Sulfate, Sorbitol, Sodium Lauryl Sulfate, Silica, Sodium Chloride, Stearic Acid, Lauric Acid, Pentasodium Penthenate, Tetrasodium Etidronate, Methylchloroisothiazoline, Methylisothiazoline, Magnesium Chloride & Nitrate magnesium.

Vanilla Stable Clear Base (Crystal SLS Free HCVS)

A base designed specifically for fragrances containing vanilla, while adding a vanilla stabilizer is not required, the soap will not darken. This is the peculiarity of fragrances with vanilla, without a stabilizer, after a while the soap begins to darken. The vanilla content in the base should not exceed 2%.
Does not contain lauryl sulfate. It lathers well and has a neutral smell.

Ingredients: water, glycerin, propylene glycol, sodium stearate, sorbitol, sodium laureth sulfate, sodium laurate, sodium chloride, stearic acid, lauric acid, sodium thiosulfate, pentasodium pentenate, tetrasodium etidronate.

Creamy soap base (Crystal OPC)

Soft white mass, does not harden, foams well, does not dry the skin. Great for creating cream soaps, scrubs, shower and face creams, and other similar products. Does not contain parabens and propylene glycol. pH 5.5. With the help of this base, a cream for soap cakes is made, you can do this with a pastry syringe. In order to make a scrub, it is enough to knead with a fork and add the necessary ingredients, including a scrub substance. More details about the preparation of scrubs in the following articles.

Ingredients: water (25-50%), glycerin (25-50%), sodium cocoyl isethionate (10-25%), sorbitol (10-25%), disodium lauryl sulfosuccinate (5-10%), sodium chloride (1 -5%), phenoxyethanol (0.5-1%), tetrasodium EDTA (0.05%).

Beldi base

Soft soap, yellowish tint. This soap is “from scratch”, that is, completely natural. Consists of saponified olive and shea oils. Beldi is a soap for a hammam (bath), it is applied to the steamed body for 2-3 minutes, after which it is washed off with a massage mitt. A very effective way to deeply cleanse the skin.

Crystal SSB foundation (white shaving base)

White. Semi-hard. Designed specifically for the preparation of shaving soap. It does not require the addition of base oils, it is enough to add only aroma. The smell is neutral. Forms a good dense foam, contains special moisturizing ingredients, thanks to which the razor glides easily over the skin. The negative feature of this base is that it tolerates low temperatures worse than other bases.

Ingredients: Water, Sodium Stearate, Sodium Cocoate, Glycerin, Sodium Lauryl Sulfate, Sodium Chloride, Dimethicone, Stearic Acid, Coconut Acid, Tetrasodium Etidronate, Pentasodium Penthenate.

Crystal Solid Shampoo Base

A solid base for making shampoo. Excellent foam, made on a vegetable basis with the addition of Aloe extract, glycerin, as well as conditioning additives. The advantage of this base is that for a solid shampoo you do not need to purchase a special container, this is already a savings, and you can also choose any shape for your shampoo. The base is quite economical to use. The smell is neutral, easily interrupted by flavors.

Ingredients: water (25% - 50%), glycerin (25% - 50%), sodium stearate (10% - 25%), propylene glycol (5% - 10%), sobit (10% - 25%), sodium laureth (5%-10%), sodium laureth sulfate (1% - 5%), sodium chloride (1% - 5%), disodium lauryl sulfosuccinate (1% - 5%), stearic acid (0.1-0.5 %), lauric acid (0.1-0.5%), pentasodium pentenate (< 0,1%), тетранатрия этидронат (< 0,1%), диоксид титана (0,1-0,5%), поликватерниум 7 (<0.1%), сок листьев Алоэ Вера (в порошке) (<0.1%), бензоат натрия (<0.1%).

Soap base "from scratch" Re-Batch SP-SG

The basis for the production of soap "from scratch" in a cold way, by casting, without the use of alkali. Manufactured using 100% RSPO certified palm and palm kernel oils. It has excellent foaming and neutral odor, which contributes to the excellent perception of fragrances without distorting their aroma and of course glycerin, which gives excellent moisturizing qualities.

Features of use: the base melts for a long time, as it is thicker (due to the high percentage of oils); it is not recommended to use a microwave for melting, the base should not be allowed to boil and lose liquid, therefore it is better to melt it in a water bath - grate it and cover the container with the base with a lid or film; since the base is more viscous and thicker, it may not reproduce very fine mold details.

Ingredients: sodium palmate (25-50%), water (25-50%), sodium palmate cornelate (5-10%), glycerin (5-10%), sorbitol (1-5%), coconut acid (1- 5%), sodium chloride (0.5-1.0%), tetrasodium glutamate diacetate (<0,1%).

Soap base jelly-like Crystal Jelly Soap

The main feature of this base is that it is plastic and similar to jelly in consistency. It lathers very well and retains odors. The jelly base soap is great for kids and can stick to smooth surfaces. The base is made from vegetable raw materials, does not contain products of animal origin. It is an innovative product that can be used in combination with other soap bases.
Features of use: the base melts in the same order as the rest, it only hardens very quickly, so you should prepare all the ingredients in advance. It is recommended to put a glass of water when melting the base in the microwave.

Ingredients: water 40-70%, glycerin 10-30%, gelatin 5-20%, sodium laureth sulfate 5-15%, PEG-7 glyceryl cocoate 1-5%, cocamidopropyl betaine 1-5%, sodium chloride 1-4% , aloe extract<1.0 em=»»>, phenoxyethanol (and) ethylhexylglycerin 0.1-1.0%.

Soap base Crystal Argan Oil

Soap base for translucent soap made from natural ingredients, including argan oil, known worldwide as "liquid gold" due to its high content of fatty acids and vitamin E. It has a natural yellow color and is completely odorless, which allows you to give the soap any aroma. Soap from this base creates a soft foam; when melted, it does not require the addition of oils, because the optimal percentage of argan is already included in the formula. Suitable for children's and sensitive skin: vitamin E, glycerin and argan oil take care of it during cleansing.

pH 7.6-8.6 (at 60˚C). Melting point: 50-60˚C

Ingredients: purified water, glycerin, argan oil, sodium stearate / Sodium Stearate, sodium laurate / Sodium Laurate.

Soap base Crystal CCA

Full name CRYSTAL CARROT, CUCUMBER & ALOE VERA is a translucent soap base made from natural ingredients: carrot oil, cucumber seed oil and aloe vera. It has a natural orange hue due to the high content of beta-carotene.

Saturates the skin with nutrients and vitamins, in particular, Omega-6, beta-carotene, provitamin A, vitamins C, E and B1. Thanks to this, the soap made from this base effectively cares for the skin, helps with various rashes, acne and even eczema. It has anti-inflammatory and antioxidant effects. Despite the natural ingredients and the absence of surfactants, which are characterized by good foaming, it foams well. The high content of glycerin in the base gives the soap a moisturizing effect and leaves a pleasant feeling on the skin after use.

Ingredients: The main ingredients are purified water, glycerin, carrot oil, cucumber seed oil and aloe vera.

Soap base Crystal OS

Crystal Oatmeal & Shea Butter is an opaque soap base made from natural ingredients: oatmeal and shea butter. Has a white color interspersed with grains. Suitable for making scrub soap.

Due to the presence of oat grains in the composition of the base, soft peeling of the skin is achieved. Soap from this base can be used in the treatment of various rashes, eczema and acne. Due to the developed "viscous" formula, scrubbing particles are distributed evenly in the soap. In addition, the soap nourishes the skin with useful substances and vitamins, such as vitamins D and E, provitamin A, the soap foams well. The high content of glycerin and shea butter, which is part of the composition, give the soap a moisturizing effect and leave a pleasant feeling on the skin after use.

Ingredients: The main components are purified water, glycerin, oat grains and shea butter.

The basis for soapCrystal Triple Butter Soap

Crystal Triple Butter Soap is a matte soap base made from natural ingredients including coconut, shea and mango oils. White.

It has good cleansing, softening, regenerating, moisturizing and nourishing properties that restore the natural health of the skin. Nourishes the skin with vitamins such as provitamin A, vitamins D and E, foams well.

Ingredients: The main components are purified water, glycerin, shea butter, mango butter, coconut oil.

The basis for soapCrystal African Black Soap

Crystal African Black Soap is made on the basis of raw materials from Ghana - African black soap, thanks to which the base has a rich brown color.

African Black Soap is made from natural vegetable oils, including coconut oil and shea butter, known for their high levels of natural antioxidants and minerals, as well as their cleansing properties.

Due to the neutral aroma of the soap base, soap can be scented with essential oils, fragrances or food flavors.

Ingredients: Water, Glycerin, Sodium Stearate, Sodium Laurate (Saponified Laurel Oil), Sodium Oleate (Saponified Olive Oil), Shea Butter*, Sodium Cocoate (Saponified Coconut Oil)*, Sodium Palm Kernelate (Saponified Red Palm Oil) *, sodium chloride, sodium citrate, citric acid.

Easy Lotion Base

Easy Lotion Base is based on sunflower oil, rich in vitamin E and ready to use. Color - white, aroma - insignificant, characteristic of the base.

Can be used in the manufacture of lotion for all skin types. It has a velvety texture and after application the skin becomes soft, silky and smooth.

The base is ready to use. Add a dye (pigment or food coloring), fragrance (perfume, food flavor or essential oil), base oil (up to 3%) and other additives to it. Does not require thickening. Suitable for making lotion in large or small volumes. Can be dispensed into dispenser bottles.

Ingredients: Aqua (Water), Helianthus Annuus (Sunflower) Seed Oil (Annual Sunflower Seed Oil (Sunflower Oil)), Cetearyl Alcohol (Cetearyl Alcohol), Polysorbate 20 (Polysorbate 20), Phenoxyethanol (Phenoxyethanol), Potassium Sorbate (Potassium Sorbate) , Citric Acid (Citric acid).

Soap base Сrystal Natural HF

This base is universal, it can be used to make any kind of solid soap. It is an excellent all-round base with reduced irritant effects on sensitive skin.

Ingredients: Glycerin (Glycerin), Aqua (Water), Sorbitol (Sorbitol), Sodium Stearate (Sodium Stearate), Sodium Oleate (Sodium Oleate), Sodium Laurate (Sodium Laurate).