Instructions for use

1. Prepare the ends of the cable for tight splicing: remove the outer insulation of the cable, leaving the required length of strands for further cutting
(70-80mm). Bare the ends of the cores (10-15mm).
2. Put an outer heat-shrinkable tube Ø 19 mm on the cable and move it temporarily to the side for easy connection, crimping and insulation of the cores.

3. Put small Ø9mm heat shrink tubes on each strand and move them temporarily to the side for easy crimping of the strands.

4. Lead the bare ends of the cores inside the insulated connecting sleeves and press them. Connect the wires strictly observing the color match. Do not connect strands of different colors. Make sure that the bare ends of the strands are fully inserted into the sleeves and insulated.

5. Alternately run small Ø9mm heat shrink tubes exactly over the couplers. Using gas burner or a building hair dryer, shrink the tubes with a hot air jet. Heating, heat shrink from the center to the edges of the tube.

6. Place a large Ø19mm heat shrink tube evenly over the entire splice.

Using a gas burner or building hair dryer, shrink the tube with a hot stream of air. Heating, heat shrink from the center to the edges of the tube. The glue applied to the inner surface of the tube, when heated and heat shrinkable, will fill the entire space inside the tube and provide sealing.

7. After processing, the compound needs to cool down for 5-10 minutes.

• If you do not have experience and you do not dare to mount a self-regulating cable set by yourself (to splice the heating cable with the electric one and seal the ends), our specialists will help you in the shop at 170 Stachek Ave.

"Smolenka" will help to carry out the installation of a set of self-regulating cable.

* - Product images used on the site may include additional equipment and components that are not included in the standard product package.

** - Technical description The product is provided by the official representative of the manufacturer and is relevant as of the date the product appears in our catalog. Manufacturer may slightly change the characteristics of the goods without our notice. Please check in advance specifications at the managers.

*** - The price of the product is valid for consumers of the category " individuals". For legal entities there is a completely different loyalty program: prices for goods can differ both up and down and depend on factors such as the frequency of purchases, the number of goods ordered and many other features and circumstances. Read more about working with legal entities.

The trouble-free operation of utilities, including pumping equipment, depends on the quality of the components that are used to mount the various components of the system. Grundfos KM heat shrink cable sleeve (round cable) - reliable element with a solid service life. Meets current standards for strength and other criteria. It is easily mounted and designed for heavy loads, therefore it is resistant to mechanical defects and aggressive environmental factors. If you buy this product and other accessories from our range, it will not be difficult to create comfortable conditions for country life.

Pickup. Pickup is free. Pickup point address: Moscow region, Tomilino town, Novoryazanskoye highway 25 km, st16, Pavilions 24G, 53B, the territory of the Stroymarket on Ryazanka market. Working hours: Mon-Sun, 9:00-19:00.

Delivery of sanitary ware in Moscow and the Moscow region is usually carried out the next day after receiving the application from 10:00 to 21:00 (without a courier time limit). An hour or two before delivery, the courier contacts the buyer by phone. The forwarder-courier may not contact the buyer who wished to receive SMS messages about the status of the order. In this case, an SMS message will be sent to the buyer's cell phone stating that the order has been delivered for delivery, where the contact phone number of the forwarding courier will be indicated.

If the value of the goods is more than 25,000 rubles. (excluding the discount: that is, taking into account the discount, the cost of the goods may cost less than 25,000 rubles), then we will deliver this product to you free of charge within Moscow (inside the Moscow Ring Road) and the territory adjacent to our warehouse (see map). if the total value of goods with free shipping not less than 70% of the order amount or, when the order amount is more than 35,000 rubles. (including the discount: that is, the amount of the order, including the discount, must exceed 35,000 rubles).

Rise to the floor. Based on the specifics of the goods, as well as the fact that delivery is carried out by our delivery service, in most cases, by car (parking problems in Moscow), then all delivery is carried out to the entrance. Rise to the floor (with an elevator / without an elevator) is a paid service, its possibility, as well as the cost, are negotiated separately and in advance with the manager accepting the order. If the goods are oversized (up to 5 kg), then, at the request of the buyer, the forwarding agent-courier can deliver the goods to the door, but is not obliged to do this: forwarders are kind people and will almost always help the elderly and pensioners to lift the goods.

You can pick up the purchased goods yourself or use the delivery service in Moscow and the Moscow region. Having placed an order today, tomorrow you will receive it at your disposal. If necessary, you can use the service of prompt delivery and receive products today.

Delivery to the entrance (check with the manager about the possibility of raising to the floor)

Delivery is made daily from 9 am to 9 pm including weekends and holidays.

Goods worth up to 6,000 rubles can be picked up by yourself.

Pickup points

For orders worth more than 6000 rubles:

• Within the Moscow Ring Road - from 0 to 500 rubles, (Individual shipping cost is indicated in the product card)
• Outside the Moscow Ring Road up to 10 km - 700 rubles,
• Outside the Moscow Ring Road further 10 km - 700 rubles + 30 rubles for each kilometer.
• In the regions, delivery by a transport company (calculated individually).

Shipping cost for

km from MKAD

700 rub.

Unloading of bulky goods is carried out by the forces and means of the customer.

Money is transferred directly to the courier upon receipt of the goods. This method is the most popular among buyers due to the simplicity and ease of calculation.

Payment bank card courier upon receipt

Couriers have a portable bank terminal available, which allows Teplovod-Service customers to pay for goods with bank plastic cards (check with the manager about the possibility of paying with a bank card).

Payment by credit card on the site

To select payment by bank card on the "Cart" page, select the item "Payment by bank card on the site".

Payment is made through PJSC SBERBANK using Bank cards of the following payment systems:

After clicking on the "ONLINE PAYMENT" button, you will be redirected to the payment gateway of Sberbank of Russia OJSC to enter your card details.

Please prepare your plastic card in advance. Additionally, you need to enter the full name, email, contact phone number, as well as the reservation number to identify the payer. The connection with the payment gateway and the transfer of information is carried out in a secure mode using the SSL encryption protocol.

If your bank supports the technology of secure online payments Verified By Visa or MasterCard Secure Code, you may also need to enter a special password to make a payment. You can check the methods and the possibility of obtaining passwords for making Internet payments at the bank that issued the card.

This site supports 256-bit encryption. The confidentiality of the reported personal information is provided by Sberbank of Russia OJSC. The entered information will not be provided to third parties, except as provided by the legislation of the Russian Federation. Payments by bank cards are carried out in strict accordance with the requirements of Visa Int payment systems. and MasterCard Europe Sprl.

When paying by credit card, interest is not charged.

Payment is a transfer Money from the buyer's current account to the seller's account, we work on a common taxation system with VAT. Delivery of goods is carried out after the receipt of funds to the account of the company "Teplovod-Service". This method is used in the calculations of legal entities.

Our details

Society with limited liability"Teplovod-Service"

OGRN: 1105003006162

TIN: 5003088884

Checkpoint: 500301001

BIC: 044525225

Bank: PJSC Sberbank of Russia

R/s: 40702810838060011732

K/s: 30101810400000000225

Jur. the address: 142718, Moscow region, Leninsky district, Bulatnikovskoye rural settlement, Warsaw highway, 21 km., office B-6

Special conditions

For goods with the status "On order" worth up to 100,000 rubles. no prepayment required.

For goods with the status "On order" over 100,000 rubles. a 30% deposit is required.

• For any item shipped transport company, 100% payment is required.