First of all, you need to connect the Philips TV to the router using a network cable or Wi-Fi, the ways in which this can be done are described in detail in the article How to connect your TV to the Internet . In this example, I will connect the TV to the router using a network cable (difference from wifi settings only one step).

We go to the main menu of the TV, to do this, press the button with the image of the House, in the future I will call this button "Home".

Select "Configuration".

Next, pull out "Connect to the network."

Select the connection type "Wireless" or "Wired". The wireless method involves connecting to a router using a Wi-Fi network, wired - using a network cable connected to the router.

If you connect via Wi-Fi, you need to select your network from the list of available Wi-Fi networks and enter a password to connect to it. If "Wired" then you need to connect the TV to the router using a network cable. As a result, you should receive a window about the successful connection to the network.

After that, you need to update the TV firmware in order to fix errors in previous version ON. To do this, press the "Home" button on the TV remote control and select "Configuration".

In the menu, click "Update software".

Specify where the firmware will be downloaded from, in this example "Internet".

Next, the TV will check if there are new versions of the software for the TV, if there is, it will offer to update them. You need to agree to the firmware update. If there are no new versions of the software, a window will open informing you that you already have the latest version of the software installed.

Now you can safely launch Smart TV on Philips TV, to do this, press the "Home" button on the remote control and select "Browse Net TV".

When you first start Smart TV on a Philips TV, you must agree to the Smart TV Terms of Service and select some settings, this will be only once, in the future such offers will not arise. The first thing that will open is the Smart TV Terms of Service, which you must agree to.

After that, a window will open in which you need to agree to the use of cookies.

The next step will be to register with Philips, this procedure is voluntary, so it is up to you whether you register or not, in this example I ignore the registration.

A window will then open asking you to remember what you are watching in order to provide you with recommendations for watching what you are interested in. I prefer not to use this feature, so I'll choose "Don't Connect".

At the next step, you will be prompted to block applications with a rating of 18+, then the choice is yours, if you enable this function, then applications 18+ will be prohibited from viewing (in the future, this functionality can be turned on or off).

This completes the list of questions, in the future, when Smart TV is launched, they will no longer be. As a result, a window will open in which you will see a list of applications installed by default, among them there is a browser with which you can visit any web pages and ready-made applications to watch movies, TV shows, cartoons, etc.

If you encounter problems setting up Smart TV on a Philips TV, the first thing to check is the network configuration of the TV, to do this, go to the menu (the "Home" button on the remote control), go to "Configuration" - "Network settings".

By selecting "View network settings" you will see your TV's network settings.

The main thing you should pay attention to is the "IP address" field, it should contain the address 192.168.X.Y (for example, 192.168.1.10 or 192.168. " each other. If at the same time Smart TV does not work for you, you need to check the settings of your router.

Here are the most popular reasons why Smart TV may not work on the TV:

Connecting the provider cable directly to the TV. The provider cable must be connected to the router, set up the Internet, and only then connect the TV to the router (via Wi-Fi or using a network cable). Only if your provider provides Dynamic IP, in which case the cable can be connected directly to the TV.

Check the operation of the router. Faced such a problem - when connected to a router, the TV gives an error that it cannot get network settings, although the laptop from the same router works fine. The solution to this problem was to update the firmware of the router, after which the TV received network settings and Smart TV worked safely. Those. do not forget about the router and its impact on the operation of Smart TV.

Updating the TV Firmware When you first set up your TV and when you use it again, be sure to install latest version Software, otherwise you may encounter the fact that all applications or some of them will not work.

Do you want to know what a smart TV from Philips is, what are its features and capabilities? Then this article is for you. In general, the concept of Smart TV involves the merging of the functions of TV and computer Internet technologies, but each manufacturer invests in their products unique distinctive features, Philips also has them.

Philips smart TVs are controlled by operating system webOS, which turns them into multifunctional multimedia centers. The following features are available to users:

1. Convenient work on the Internet;
2. Unique games and applications that expand the functionality of the device;
3. Watching videos online without a PC;
4. Philips Smart TV has a number of features that were previously available only to owners of computers;
5. Special widgets that provide users with all the necessary information;
6. Tools for comfortable interactive communication;
7. Incredible high quality Images;
8. Support for Android TV OS in a number of models;
9. Intuitive interface;
10. Availability of Google services;
11. A convenient and useful recommendation system that automatically selects movies and other materials based on user preferences.

Of course, such a device needs access to the Internet. It can be accessed via Wi-Fi or via cable connection. When wireless connection, just select it from the list and run it. After the upgrade process, which will be described in the next section, you can enjoy all the variety of smart TV features.

During the first launch, the system will issue the terms of use, with which the owner must agree.

You must also give permission to use cookies. Registration on the official website in this case is voluntary and you can refuse it.

For the correct operation of the equipment, you must obtain the latest version of the software. You can do this by going to the “Main Menu Configuration” item. You will be notified when the update process is completed.

Read the article for instructions and tips on how to connect your Philips TV to a laptop, wi-fi, smartphones and any other device.

Having bought it, I want to try it in action. Initially, we connect an antenna to it in order to set up the display of TV channels. There shouldn't be any problems with this case. As a last resort, you can read our separate article on setting up digital TV. But modern LCD TVs are designed not only for showing TV! How to connect other devices? Let's find out.

Now even the cheapest TVs have enough large quantity connectors. This means that you can connect a camcorder, DVD player, game console and many other devices to them. Also, every Philips TV has at least one USB port. An external drive is connected to it, which, probably, makes no sense to talk about in all the details. But how to deal with connecting a laptop? Or how to provide the TV with access to the Internet, which is required for the operation of Smart TV? And in favor of which connector should you choose when connecting a home theater? All these issues require detailed coverage.

Headphone connection

The easiest way to connect headphones to any TV. If they are wired, then the 3.5 mm "jack" only needs to be inserted into the appropriate socket. As for wireless models, they come in two varieties. The first category includes headphones for the TV, which transmit a signal using their own radio frequency. These products come with a special base, also called a docking station. It has a wire that connects to a 3.5mm audio jack. Also, the base must be connected to the mains. It is this docking station that transmits a signal through the air, which is already picked up by the headphones themselves. Such a device can be connected to absolutely any Philips TV - as long as it has a 3.5 mm headphone jack.

Everything is much more complicated with the second type of headphones, to which Bluetooth models belong. It all depends on the capabilities of the TV. Even if you found in technical specifications the mention of the presence of a built-in Bluetooth module does not mean anything. It is possible that it is only used to connect a wireless mouse and a special remote control. Therefore, at first it is better to read reviews on your own TV or ask a question about compatibility with Bluetooth headphones on the official website of the manufacturer.

If you know for sure that you can connect such headphones, then all that remains is to go to the TV menu and find the settings section. You should be interested in the “Bluetooth” subsection, where you can scan the surrounding space for wireless devices and connect them. In general, the pairing process is no different from how this business is implemented on smartphones.

Almost any Philips LCD TV can play movies stored on a USB flash drive or external hard drive. And some models have support for DLNA technology, thereby being able to play content from a computer or drive connected to the router. And we must not forget about Smart TV - support for this technology allows you to watch movies online without even downloading them. What to do if the quality of the picture suits you, but you want to output the sound to the soundbar or speakers? Do modern TVs have such an opportunity? Of course, this is quite possible to do. The creators of TVs most often do not assume that you will absolutely always use the built-in speakers. So, how do you connect a home theater system to a Philips TV?

On the back of the device you will find enough a large number of connectors. The following jacks are used for sound output:

• The optical output is the ideal option, which involves the use of a fiber optic cable that is protected from electromagnetic interference. Audio can be output from this jack in multi-channel mode.
• Coaxial output (S / PDIF) - also allows you to output multi-channel audio. It is output in digital form - its conversion to analog form occurs already on the side of the speakers or sound bar. Unfortunately, the cable used will most likely not be as shielded as possible from electromagnetic interference. However, the vast majority of users do not notice this.
• RCA - red and white sockets for traditional "tulips", above which is the inscription "OUT". Only stereo sound is transmitted through them, but in analog form. In this regard, absolutely all speakers, even the cheapest ones, have corresponding inputs.
• SCART - analog stereo sound is also transmitted through this connector. Additionally, you will need an adapter and an RCA cable.
• The 3.5mm audio jack is the worst option, usually used only because there are no other audio output jacks. To use this connector, you will need a 3.5mm-RCA cable. Of course, it will not work to output sound in 5.1 or 7.1 format in this way.

Connecting a set-top box or game console

Some people who are tech-savvy are thinking about getting a Philips TV. Note that this should only be done if the TV itself does not support digital TV display. If he understands, then insert the terrestrial antenna cable into the TV - it will accurately recognize all available channels.

If it is necessary to connect a set-top box, then this is usually done using an HDMI cable. One of its ends is inserted into the purchased device, and the other - into the TV. Next, using the "Input" button on the remote control, you need to go to the active HDMI input (do not forget to turn on the set-top box before that). That's all, you will immediately see the image coming to the HDMI connector. Further configuration of the set-top box is carried out using the remote control that was supplied with it.

If your TV does not currently have a free HDMI socket, then a splitter can solve the problem. This is a small box-separator, which can be bought for 500-700 rubles.

Also, a TV set-top box can be connected using traditional "tulips". But in this case, you should not hope for high image quality. Also, it is through the “component” that old game consoles are usually connected - Dendy, SEGA, PS One or even PS2. If we talk about new game consoles, starting with the PlayStation 3, then an HDMI cable is already used to connect them.

Internet connection

Modern Philips LCD TVs may support . This suggests that through such a device you can watch content located in the vastness of the global web. However, for this you need to provide the TV with Internet access, for which the following methods are used:

• Wired connection - when the TV and the router are connected by a network cable;
• Wireless connection - when Internet traffic is transmitted over a Wi-Fi network.

So, how to connect the Internet to a Philips TV in one way or another? Let's start with the classic wired version, since it is through the cable that the most high-speed data reception is most often possible. This is important in cases where the video looks very high quality.

Instruction

First of all, the owner of the TV needs to get a network cable. You can buy it at any store that sells computer goods. One end of the wire must be inserted into the LAN connector located on the back of the TV, and the other end into the same port on the router (usually it is colored yellow). It is not recommended to connect the Internet cable directly, bypassing the router - the TV may simply not understand the type of connection used by your operator.

Now you need to set up Smart TV so that the operating system recognizes the Internet connection. To do this, press the "Home" button (on remote controls from Philips, it usually looks like a wooden house). Go to the "Settings" section.

In the window that opens, select the "Install" item, and then click on "Connect to the network." You will now be asked to agree to the offer by clicking the "Connect" button.

You will be taken to a completely new settings window. Here you need to select the "Wire" item. This completes the setup process - it is possible that the system will only ask you to press the "OK" button.

If you are thinking about how to connect Wi-Fi to a Philips TV, then instead of the “Wire” item, you must select the “Wireless” item. After that, the setup process will not end, because the TV cannot connect to absolutely any Wi-Fi network surrounding it.

Determining specifically your home Wi-Fi network is possible in two ways. The first is to press the WPS button. After that, the corresponding button must be pressed on the router. As a result, the two devices will automatically connect, nothing more is required from you. If there is no WPS key on the router (many budget models are deprived of it), then click on the "Scan" button. This will cause the TV to scan the surrounding area for Wi-Fi networks, displaying a list of them on the screen. After that, you just have to click on the name of your network, and then enter the password. Your next steps are to press the "Finish" and "Next" buttons, after which you can enjoy Internet access.

Please note that after connecting to the global web, the TV may ask you to update the firmware. Be sure to do this, as the developers could introduce some new features into their software. Also keep in mind that older Philips LCD TVs may not have built-in Wi-Fi. They require an external adapter, the name of which should be found in the instruction manual.

Connecting a smartphone or tablet

So, we will assume that the TV is connected to the network. But now the user notices that the bundled remote control is not the most suitable for controlling the Smart TV function. in the best way. It's like you switched from a touch-screen "android" to some push-button Nokia N95 - it seems to be also a smartphone, but the choice of any menu item takes much longer. How can you make your life easier? You can buy a special remote control with a trackball or a gyroscope. But this is too expensive, so many people are thinking about how to connect a phone to a Philips TV. In fact, there is nothing complicated in this.

The only condition for a successful connection is that the smartphone and TV are on the same Wi-Fi network. If the mobile device is currently transmitting data via 3G or LTE, then forcibly activate the Wi-Fi module by clicking on the corresponding icon in the notification panel.

What else is required to connect a smartphone or tablet? Of course the official mobile app. It should be the Philips TV Remote program. You can download it not only from Google Play - there is a separate version for iPhone, iPad and iPod Touch. Be sure to install this application on your smartphone, and then launch it.

Please note that for Philips TVs released in 2013, a different program is needed - it is called MyRemote. Unfortunately, it can only be found in the AppStore, while the Android version will have to be found on w3bsit3-dns.com or some other sites.

As for the use of the application, then in this regard you will not expect any difficulties. First of all, the program will scan the Wi-Fi network for the presence of a Philips TV on it. Next, you just need to press your finger on its name. This application turns a smartphone into an analogue of the remote control. The only difference is that the program is much more convenient to use - the choice of many functions is much faster. Also, this application allows you to play on the TV those media files that are stored in the smartphone's memory. Finally, the phone makes it easy to enter text, which is required when typing passwords or anywhere else.

What else can you connect your Philips TV to?

Perhaps, with the connection of other devices, you can figure it out without any hint. For example, an external hard drive or flash drive is connected to a USB port - there is nothing complicated about it. The system will immediately prompt you to automatically go to the contents of the drive. If this does not happen, then using the "Input" button, go to the "channel" called "USB". Or "USB 1" if there are several such connectors. The exact steps depend on the implementation of the specific TV.

As for camcorders, Blu-ray players and other similar devices, they are connected strictly to the HDMI input. Finding the desired "channel" is carried out, again, by pressing the "Input" button. You can connect a laptop to a Philips TV in the same way - an HDMI connector is now present on almost any laptop.

If you want the picture to be displayed only on the TV, then on the computer you need to go to the "Control Panel". Here you need to go to the "Hardware and Sound" section. Depending on the specific version of the operating system, here you need to look for an item that is responsible for the method of displaying an image on two screens. Usually it is enough to press the "Turn off the display" button and select the "Only" item. Of course, the image will return to the laptop screen when you disconnect the HDMI cable.

If you have a lot of different devices that you would like to connect to your TV, then buy yourself an AV receiver. It will greatly simplify this matter by offering a huge number of connectors, allowing you to forget about splitters.

Conclusion

Now you know how to connect your Philips TV to various gadgets, as well as to the Internet. Finally, we will give you a little advice. If the purchased TV supports DLNA technology, then connect an external hard drive to the router. In this case, the TV will definitely recognize the media files contained on the external drive. Plus, you can view them on your smartphone, tablet or computer.

Is your Philips TV used alone or paired with some devices? Was it easy to connect the “box” to the internet? Share your opinion in the comments.

Do I need to buy a special WI-FI adapter for my Philips TV? It is necessary if the device model of this brand is equipped with the ability to activate Smart TV, but does not have a built-in device for connecting to a wireless network. In fact, the situation when a television receiver has Smart TV technology in the list of additional features, but is not equipped with a built-in Wi-Fi signal converter, occurs quite often.

In this case, you will either have to connect the device to the Internet via a cable, which is not very convenient, or purchase a special adapter that will allow you to connect the TV to WI-FI network. But first things first.

What is a WI-FI adapter

A WI-FI adapter is a special device that allows you to connect a wireless Internet connection to the device. It acts as an intermediary that receives the signal, converts it, and then transmits it to the device to which it is connected.
In addition to receiving and transmitting a WI-FI signal, such devices can significantly expand the functions of devices, in this case a TV, by activating smart TV capabilities.

The advantages of using removable Wi-Fi converters for television receivers are as follows:

• fast connection;
• no need for additional cable laying;
• high speed signal reception / transmission;
• ease of operation;
• compact dimensions.

The disadvantages include the waste Money for the purchase of additional equipment. Often, devices such as removable USB converters for TVs are quite expensive. And the main inconvenience is that television receivers are not able to recognize the usual universal devices that are used for computers, tablets or laptops. For each device - a representative of the brand of a particular manufacturer, an adapter of the same brand and no more is suitable. So, for Philips TVs, there are two models of network converters, the characteristics and capabilities of which will be discussed below.

Phillips Wi-Fi Receiver Models

For Phillips television receivers, the manufacturer provides two models of adapters - PTA128/00, PTA01/00. Wi-Fi adapter for Philips TV is installed via the USB port on the side of the device. An important point is that these converters are not suitable for all Phillips TV models. You can get acquainted with the list of device models that are able to recognize and support PTA01 and PTA128 connection on the official website of the manufacturer.

Model PTA128/00 is:

• high connection speed;
• the ability to install a special plug and play program;
• extended range due to dual antenna.

Model PTA01/00 is another representative of converters from Phillips. The model has become widespread among users, although it is more expensive than the previous representative. Using PTA01, the user gets:

• high speed connection;
• data protection with WPA2 encryption;
• plug and play installation.

Among the possibilities of Smart TV with WiFi connection converters include:

• control TV and Smart TV using a tablet, phone or keyboard;
• viewing photos, films;
• audio playback;
• watching programs at a convenient time even after the broadcast;
• a large number of Internet applications.

Connecting and configuring Phillips adapters

The procedure for connecting and configuring the PTA128 and PTA01 network receivers is quite simple thanks to the intuitive interface of the TV receivers of this brand. Consider the sequence of actions when connecting the converter to the device:

1. Find the USB connector on the device panel. Most often, this connector is located on the side of the TV case.
2. Insert the adapter into the socket. If necessary, you can additionally use a USB cable.
3. After the device is connected, the program for installing and configuring the wireless network for the device will start.
4. After starting the program, the screen will display step-by-step instruction on the wireless connection setup you need to follow.
5. You can use WPS for setup if your router has one.
6. If there is no WPS, the WPA password is used, after entering which the device will connect to the network.

Thus, the process of connecting and configuring the network converter is simple and within the power of any user. Before buying this type of Wi-Fi signal receiver, you need to make sure that your TV model is capable of supporting a wireless network connection. Usually you can find such information in the instructions that came with the device. For such devices, a special type of marking on the packaging is also provided. The Wi-Fi Ready label indicates that the device does not have a built-in Wi-Fi signal receiver, but it is possible to connect additional devices to establish a wireless connection.

If your Philips Smart TV (Android TV) does not have a built-in Wi-Fi adapter for connecting to the Internet via Wi-Fi, you can connect the TV to the Internet using a network cable. Of course, you can buy an external, branded adapter for a Philips TV, and then you can connect to the router wirelessly.

But, if the router is not far from the TV, if it is not difficult to lay a network cable, then you can easily connect the TV to the router using a LAN cable. By the way, such a cable should be included with the router. True, it is usually short there. If you need a long network cable, you can buy it. Usually, in stores where they sell computers, they can compress the cable to the length you need without any problems.

If you can’t stretch the cable from the router, then see if your Philips TV supports Wi-Fi connection. Wrote about it in this article.

Another option if you have an extra wifi router, then it can be , or in . Put it near the TV, and connect them with a network cable. The router will receive Wi-Fi internet from your main router and transmit it via cable to your Philips TV.

You can connect the cable from the Internet provider directly to the TV. And the internet will work. But provided that your provider uses Dynamic IP connection technology. If you have PPPoE, L2TP, PPTP, then the TV will not be able to raise such a connection. You will need a router.

Connecting a Philips TV to a router using a cable

Take the network cable. Connect one end on the router to the LAN connector, and the other to the network connector on your TV. On my Philips 43PUS7150/12 TV, the network connector is labeled as network.

Just connect the router to the TV.

Press the button on the remote control "Home" to open Smart TV and scroll to the bottom of the page, there will be Settings. Select Wired and wireless networks.

Choose an item Wired or WiFi, and press the right arrow.

Choose an item Wired.

The TV will connect to the router. If everything connects, just select To complete.

That's all. The TV is connected to the internet. You can watch online movies, set up watching movies from a computer, open websites in a browser, install programs and games on Android TV, etc.

If the TV does not connect to the Internet, then check if the network cable is connected well. Also, check if the router is working. You can connect the Internet, for example, to a computer to make sure that everything works.