Distinctive features and equipment:

• heavy cast bed, which has undergone special processing, dampens any vibrations that occur during processing, allows you to get high-quality products;
• high-speed spindles of increased accuracy;
• for the manufacture of serving tables, Art. 40X (with chrome) for increased wear resistance;
• dispersed type feed mechanism with upper and lower feed rollers;
• the upper feed rollers are equipped with mechanical clamps, which allows processing at low negative temperatures;
• feeding upper rollers can be equipped with a pneumatic clamping system with continuously adjustable pressure force, which can adjust the pressure separately;
• the upper feed rollers are made with “wolf tooth” corrugation, which ensures the processing of the workpiece of any humidity, with less indentation of the rollers into the wood;
• the table lubrication system is used to reduce the load on the feed mechanism and to pull lumber of natural moisture;
• the machines are equipped with a system of digital indication of the movement of the spindles;
• the molding support can work both in the lower and in the upper position;
• at the request of the customer, it is possible to equip with a set for longitudinal sawing of the workpiece.

Processed lumber meets the following parameters:

• the straightness of the base side of the machined workpiece is not more than 0.3 mm over a length of 1000 mm;
• the perpendicularity of the sides of the base face of the processed workpiece is not more than 0.25 mm over a length of 100 mm;
• the uniformity of the thickness and width of the processed sample is not more than 0.3 mm.

Notes:
- profile cutters are not installed on the lower support

The aspiration system is purchased at the rate of 2000 cubic meters. m/h per machine support.

The machine complies with the current GOSTs and TU for this group of goods, which is confirmed by the presence of a certificate of conformity and marks of the manufacturer.

The supplied equipment is guaranteed for 12 months.

C25-5A. Five milling spindles of a heavy series machine.

The machine of the heavy series C25-5A is designed for the production of various molded products and profiled timber, including natural moisture.

• The heavy cast bed, which has undergone special processing, dampens any vibrations that occur during processing, and allows you to get high-quality products.
• High-speed spindles of the increased accuracy.
• For the manufacture of feed tables, steel 40X (with chromium) is used to increase wear resistance.
• Distributed feed mechanism with upper and lower feed rollers.
• The feed drive from the electric motor to the module shaft is organized by a pulley on the electric motor shaft and a pulley on the module shaft. Pulleys are 2-stage, 3-strand with the use of common V-belts. The pulley on the shaft of the modules moves freely, which allows you to get 4 permanent gears. In combination with a frequency converter installed in the electrical cabinet and changing the speed of rotation of the electric motor, the resulting speed range is from 2 to 40 m/min with guaranteed broaching of any workpiece.
• The upper feed rollers are equipped with mechanical clamps, which allows processing at low negative temperatures.
• The feeding upper rollers can be equipped with a pneumatic clamping system with continuously adjustable pressure force, which can adjust the pressure separately.
• The upper feed rollers are made with "wolf tooth" corrugation, which ensures the processing of the workpiece of any humidity, with less indentation of the rollers into the wood.
• The table lubrication system is used to reduce the load on the feed mechanism and to pull lumber of natural moisture.
• The machines are equipped with a system of digital indication of the movement of the spindles.
• The caliper can work both in the lower and in the upper position.
• At the request of the customer, it is possible to equip with a set for longitudinal sawing of the workpiece.
• The aspiration system is purchased at the rate of 2000 m 3 / h per one machine support.
• The machine complies with the current GOSTs and TU for this group of goods, which is confirmed by the presence of a certificate of conformity and marks of the manufacturer.
• The supplied equipment is guaranteed for 12 months from the date of commissioning by the manufacturer or the representative of the plant (dealer).

• The straightness of the base side of the machined workpiece is not more than 0.3 mm over a length of 1000 mm.
• The perpendicularity of the sides of the base face of the processed workpiece is not more than 0.25 mm over a length of 100 mm.
• The uniformity of the thickness and width of the processed sample is not more than 0.3 mm.

Replacement parts and accessories*, ordered as an option (upon request and at an additional cost). You can check the exact price and production time with our managers. Shipment after 100% prepayment. Production time after an advance payment of 50% within 21 calendar day. The cost of commissioning is calculated for each client individually.

* - the range and quantity of wood cutting tools supplied with the machine is determined according to the supply contract (including cylindrical milling cutters).

• Soundproof fence. Protection of personnel from noise vibrations - 1 pc.
• Electric motors of the 2nd and 3rd spindles, 11 kW each. Installation of electric motors of increased power on vertical calipers - 1 set.
• Electric motors of 2.3 spindles, 15 kW each. Installation of electric motors of increased power on vertical calipers - 1 set.
• Wooden packing box - 1 pc.
• Vibration support. Installations on the foundation - 8 pcs.
• Pneumatic clamping system. Simplifies pressure adjustment of pressure rollers. (C25-5A.70.000) - 1 set.
• Plate. Installation of saws for longitudinal sawing of the workpiece on the molding support. (C25-5A.11.100) - 2 pcs.
• Plate. Installation of saws for longitudinal sawing of the workpiece on the molding support. (C25-5A.11.100-01) - 1 pc.
• Rolling pin. Installation on the molding support of the upper clamp C16-2A.33.000. (C16-1A.17.024-01) - 1 pc. (in the collection).
• Upper clamp. Machining thin workpieces and sawing with a moulder. (C16-2A.33.000) - 1 pc. (complete)
• Flange. Installation on the molding support of the upper clamp C16-2A.33.000. (C16-1A.17.034) - 1 pc. (complete)
• Pin. Installation on the molding support of the upper clamp C16-2A.33.000. (6x60 GOST 3129-70) - 1 pc. (complete)
• Screw. Installation on the molding support of the upper clamp C16-2A.33.000. (M6-6gx2.56.05 GOST 11738-84) - 4 pcs. (complete)
• The mandrel is collet right. Possibility of mounting a wood cutting tool with a bore diameter of 60 mm on the upper horizontal spindle. (IP.07.000) - 1 pc.
• The mandrel is collet right. Possibility of mounting a wood cutting tool with a bore diameter of 60 mm on the right vertical spindle. (IP.07.000-02) - 1 pc.
• The mandrel is collet left. Possibility of mounting a wood cutting tool with a bore diameter of 60 mm on the moulder spindle. (IP.08.000) - 1 pc.
• The mandrel is collet left. Possibility of mounting a wood cutting tool with a bore diameter of 60 mm on the left vertical spindle. (IP.08.000-02) - 1 pc.
• Device for removing cutters. Removal of cylindrical wood-cutting mills from spindle shafts. (IP.12.000) - 1 pc.
• Device for installation of knives of combined mills. Installation of knives in wood-cutting cylindrical planing drums with a diameter of 140 mm. (IP.21.000-02) - 1 pc.
• Foundation bolt. If vibration supports are purchased. (1.1.M20X330. St3 GOST 24379.1-80) - 8 pcs.

* - on request, vertical spindles with a length / diameter of 170x50 mm are manufactured.

** - profile cutters are not installed on the lower support.

* - electric drive. Braking of spindles electrodynamic, direct current.

• The machine is assembled. (C25-5A.00.000) - 1 pc.
• Sleeve (possibility of processing narrow workpieces). Installation instead of the left row of feed gear rollers in the direction of the workpiece. (C16-1A.00.028) - 10 pcs.
• Plate. Mounted on a molding support for profiling. (C25-5A.11.021-03) - 2 pcs.
• Video clip. Installed instead of feed rollers for processing narrow workpieces. (C25-5A.10.011-01) - 2 pcs.
• Fencing. Mounted on a molding support for profiling. (C25-5A.11.020) - 1 pc.
• Key. Tightening and loosening the nut fixing the tool on the spindle. (IP.16.000) - 1 pc.
• Key. Tightening and loosening the nut fixing the tool on the spindle. Ease of use with the right vertical caliper. (IP.17.000) - 1 pc.
• Ring set. Spacers for horizontal spindle shafts for the possibility of installing wood cutting tools of various lengths. (IP.35.000) - 3 pcs.
• Ring set. Spacers on vertical spindle shafts for the possibility of installing wood cutting tools of various lengths. (IP.36.000) - 2 pcs.
• Lever. Movement of calipers in the horizontal and vertical direction. Loosening and tightening the locking screws. (DIN468-160-V17) - 1 pc.
• Key. (7812-1606 D Chem. Ox. prm. GOST 25787-83) - 1 pc.
• Headphones antinoise. (COM 3 GOST 12.4.051-87) - 1 pc.
• Additional support. Machining workpieces with a width of more than 160 mm with a lower horizontal spindle. (C25-4A.12.500) - 1 pc.
• Additional support. Machining workpieces over 160 mm with an upper horizontal spindle. (C25-4A.15.500-02) - 1 pc.
• Additional support. Machining workpieces with a width of more than 160 mm with a molding lower horizontal spindle. (С25-4А.15.500-06 В/Н) - 2 pcs.
• Manual. (S25-5A RE) - 1 pc.

The mechanism for feeding blanks is driven by an electric motor (1). The feed drive from the electric motor to the module shaft is organized by a pulley (2) on the electric motor shaft and a pulley (3) on the splined shaft (4) of the modules (5). Pulleys 2-speed, 3-groove with the use of common V-belts A-1000 III GOST 1284.1-88 (6). The pulley on the splined shaft of the modules moves freely, which allows you to get 4 permanent gears. In combination with a frequency converter installed in the electrical cabinet of the machine and changing the speed of rotation of the electric motor, the total speed range obtained is from 2 to 40 m/min. Tensioning, loosening or rearrangement of the belts is done by removing the guard (7) and turning the threaded screw (8).

Feed speed 7 m/min at 50 Hz (with frequency converter 2-14 m/min).

Feed speed 10 m/min at 50 Hz (with frequency converter 5-20 m/min).

Feed speed 13 m/min at 50 Hz (with frequency converter 6-26 m/min).

Feed speed 19 m/min at 50 Hz (with frequency converter 9-40 m/min).

Distinctive features and equipment:

Heavy cast bed, which has undergone special processing, dampens any vibrations that occur during processing, allows you to get high-quality products;

High-speed spindles of increased accuracy;

For the manufacture of serving tables, Art. 40X (with chrome) for increased wear resistance.

Distributed feed mechanism with upper and lower feed rollers.

The feed drive from the electric motor to the module shaft is organized by a pulley on the electric motor shaft and a pulley on the module shaft. Pulleys are 2-stage, 3-strand with the use of common V-belts. The pulley on the shaft of the modules moves freely, which allows you to get 4 permanent gears. In combination with a frequency converter installed in the electrical cabinet and changing the rotation speed of the electric motor, the resulting speed range is from 2 to 40 m/min with guaranteed broaching of any workpiece.

The upper feed rollers are equipped with mechanical clamps, which allows processing at low negative temperatures;

The feeding upper rollers can be equipped with a pneumatic clamping system with continuously adjustable pressure force, which can adjust the pressure separately;

- upper feed rollers are made with “wolf tooth” corrugation, which ensures the processing of the workpiece of any humidity, with less indentation of the rollers into the wood;

The table lubrication system is used to reduce the load on the feed mechanism and to pull lumber of natural moisture;

The machines are equipped with a system of digital indication of the movement of the spindles;

The caliper can work both in the lower and in the upper position.

At the request of the customer, it is possible to equip with a set for longitudinal sawing of the workpiece.

Processed lumber meets the following parameters:

The straightness of the base side of the machined workpiece is not more than 0.3 mm over a length of 1000 mm;

The perpendicularity of the sides of the base plate of the processed workpiece is not more than 0.25 mm over a length of 100 mm;

The uniformity of the thickness and width of the processed sample is not more than 0.3 mm

Specifications for C25-5A

Notes:

Profile cutters are not installed on the lower support

Completeness

The aspiration system is purchased at the rate of 2000 cubic meters. m/h per machine support.

The machine complies with the current GOSTs and TU for this group of goods, which is confirmed by the presence of a certificate of conformity and marks of the manufacturer.

The supplied equipment is guaranteed for 12 months from the date of commissioning by the manufacturer or the representative of the plant (dealer).

The cost of commissioning is calculated for each client individually.

Basic data:

The drive is electric.

Braking of spindles electrodynamic, direct current.

The amount of movement of the calipers: